Month: May 2021

Electric Literature of 654-70-6,Some common heterocyclic compound, 654-70-6, name is 4-Cyano-3-trifluoromethylaniline, molecular formula is C8H5F3N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The indicated aniline (0.52 g, 2.8 mmol) was added to a solution of the bromide (prepared according to the procedure of Example 5, 0.21 g, 0.56 mmol) in Toluene (3 mL), followed by Cs2CO3 (0.18 g, 0.56 mmol). The reaction mixture was heated at reflux overnight. The reaction mixture was cooled to room temperature and H2O was added. The resulting mixture was extracted with ethyl acetate (3×80 mL). The combined ethyl acetate extracts were washed with brine and dried over Na2SO4. Na2SO4 was then filtered off and solvent was evaporated in vac and the residue was chromatographed on silica gel using acetone:hexanes (20:80) 1% Et3N to give the titled compound. NaH (7.0 mg, 0.17 mmol) was added to the aniline (prepared according to the procedure of Example 19 Step 1, 41.0 mg, 0.09 mmol) in THF (1.5 mL) at -20 C. and stirred under N2 for 10 minutes. MeI (16.3 muL, 0.26 mmol) was added to the reaction mixture and the resulting mixture stirred at room temperature overnight. The residue was partitioned between ethyl acetate and H2O. The combined ethyl acetate extracts were dried over sodium sulfate and filtered. The solvent was evaporated in vac to give the titled compound. Aqueous NaOH (50, 2 mL) was added to the nitrile (prepared according to the procedure of Example 19 Step 2, 171.2 mg, 0.35 mmol) in MeOH (10 mL) and THF (4 mL). The reaction mixture was heated at reflux overnight. The reaction mixture was cooled to room temperature and neutralized with acetic acid, then extracted with ethyl acetate. The combined ethyl acetate extracts were washed with brine and dried over Na2SO4. Na2SO4 was then filtered off and solvent was evaporated in vac. The residue was chromatographed on silica gel using ethyl acetate:hexanes (20:80) 2.5% acetic acid to give the titled compound. 1H NMR (CDCl3) delta7.99 (d, 1H, J=9.0 Hz), 7.59 (d, 1H, J=9.0), 7.07 (m, 2H), 6.84 (m, 1H), 4.18 (t, 2H, J=5.5), 3.75 (t, 2H, J=7.5), 3.13 (s, 3H), 3.00 (t, 2H, J=7.5), 2.20 (m, 2H), 1.80 (m, 2H), 1.00 (t, 3H, J=7.5). MS: m/z=505 (M+H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Cyano-3-trifluoromethylaniline, its application will become more common.

Reference:
Patent; Adams, Alan D.; Huang, Shaei Y.; Szewczyk, Jason W.; US2006/178398; (2006); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 1261609-83-9, These common heterocyclic compound, 1261609-83-9, name is 2-Bromo-5-(hydroxymethyl)benzonitrile, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step B: Preparation of 2-bromo-5-(chloromethyl)benzonitrile [00231] To a magnetically stirred mixture of 2-bromo-5-(hydroxymethyl)benzonitrile (0.5 g, 2.358 mmol) in dry DCM (11.79 ml) at ice-bath tetmperatures was added thionyl chloride (0.344 ml, 4.72 mmol) in a dry 50 mL round-bottomed flask. DMF (0.5 mL) was added to aid solubilization. The reaction mixture was stirred at reduced temperature for 15 min and then was allowed to warm to rt. After 1 h, GC-MS analysis indicated the reaction was complete. The reaction mixture was diluted with DCM and sat’d aq. NaHC03, then stirred vigorously for 30 min. The layers were separated, the aq layer was extracted again with DCM, and the combined DCM extracts were dried over sodium sulfate, and filtered through a phase separator. The DCM was evaporated to afford 485 mg (56%) of the title compound as a white wax. H NMR (400 MHz, CDCI3) delta 7.70 (d, J = 3.8 Hz, 1H), 7.68 (d, J = 2.1 Hz, 1H), 7.48 (dd, J = 8.4, 2.3 Hz, 1H), 4.54 (s, 2H). 13C NMR (101 MHz, CDC13) delta 137.70, 134.03, 133.82, 133.60, 125.14, 116.62, 116.36, 43.93. GC-MS m z 231.

The synthetic route of 1261609-83-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DOW AGROSCIENCES LLC; LOSO, Michael R.; GUSTAFSON, Gary D.; KUBOTA, Asako; YAP, Maurice C.; BUCHAN, Zachary A.; STEWARD, Kimberly M.; SULLENBERGER, Michael T.; HOEKSTRA, William J.; YATES, Christopher M.; WO2015/160665; (2015); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Application of 42872-83-3,Some common heterocyclic compound, 42872-83-3, name is 2-Bromo-5-methylbenzonitrile, molecular formula is C8H6BrN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a mixture of 2-Bromobenzonitrile (183.4 mg, 1 mmol), benzaldehyde (210.5 mg, 2 mmol),CuCl2 (17.2 mg, 0.1 mmol), Cs2CO3 (652.2 mg, 2 mmol), and L-proline (23.2 mg, 0.2 mmol) in H2O(2 mL) was added 27% aqueous ammonia (1 mL) in a tube under air atmosphere. Then the tubewas sealed, and the mixture was stirred at 100 C for 12 h. Next, the tube was opened to air and themixture was stirred at 100 C for another 12 h. After being cooled to room temperature, the resultingmixture was quenched with NH4Cl solution and extracted with ethyl acetate. The combined organiclayer was washed with brine, and then dried over anhydrous Na2SO4. The solvent was evaporatedunder reduced pressure and the crude product was purified by chromatography on silica-gel to afford2-phenylquinazolin-4(3H)-one (4aa) in 75% isolated yield.

The synthetic route of 42872-83-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Liu, Zibin; Zeng, Li-Yan; Li, Chao; Yang, Fubiao; Qiu, Fensheng; Liu, Shuwen; Xi, Baomin; Molecules; vol. 23; 9; (2018);,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Synthetic Route of 23842-82-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 23842-82-2, name is 2-Amino-5-methoxybenzonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

[0340] Following a reported procedure (Michaelidou, S. S.; Koutentis, P. A. Tetrahedron 2010, 66, 685-688), 2-amino-5-methoxybenzonitrile (Manetsch, R. et al. Chem. Eur. J. 2004, 10, 2487-2506) (0.109 g, 0.74 mmol) was treated with paraformaldehyde (0.024 mg, 0.81 mmol), potassium cyanide (0.053 g, 0.81 mmol), zinc chloride (0.201 g, 1.473 mmol) and sulfuric acid (1 drop) in acetic acid (2.2 mL) in a sealed tube. The mixture was then stirred at 55 C. overnight. The reaction mixture was allowed to cool to room temperature, poured onto ice and made pH neutral with Na2CO3. Filtration of the precipitate gave the title compound (0.068 g, 50%). [0341] 1H NMR (CDCl3, 400 MHz) delta 7.11 (dd, 1H, J=2.8, 9.1 Hz), 6.98 (d, 1H, J=2.8 Hz), 6.75 (d, 1H, J=9.1 Hz), 4.15 (s, 2H), 3.74 (s, 3H). [0342] MS (ESI) m/z 188.1 [M+H]+ ([M+H]+, C10H10N3O requires 188.2).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Amino-5-methoxybenzonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Board of Regents of The University of Texas System; McKnight, Steven L.; Pieper, Andrew A.; Ready, Joseph M.; Fernandez, Enrique; US2014/57900; (2014); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 508203-48-3, name is 2,3-Difluoro-4-methylbenzonitrile, A new synthetic method of this compound is introduced below., category: nitriles-buliding-blocks

To a heterogenous solution of 2,3-difluoro-4-methylbenzonitrile (5.0 g, 32.6 mmol) in ethanol (11 1 mL) at 25C was added hydroxylamine hydrochloride (4.5 g, 65.3 mmol). The reaction mixture was heated at 80C for 2 hours. After cooling to room temperature the volatiles were removed under reduced pressure thus affording a white solid that was used in the next step without purification. (0432) NMR (400 MHz, DMSO-de) delta ppm: 9.30 (brs, 3H), 7.30 (m, 1 H), 6.95 (m, 1 H), 2.30 (s, 3H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SYNGENTA PARTICIPATIONS AG; HOFFMAN, Thomas, James; STIERLI, Daniel; BEAUDEGNIES, Renaud; POULIOT, Martin; HAAS, Ulrich, Johannes; (111 pag.)WO2018/219773; (2018); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 10496-75-0, name is 2-Methoxy-5-nitrobenzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 10496-75-0, Formula: C8H6N2O3

General procedure: 58.2 mol) of the 5-nitro-2-alkoxybenzonitrile prepared in the previous step was added to the reaction flask and the reduced iron powder(223. 8 mmol), ammonium chloride (29. 1 mmol), ethanol (15 mL) and water (45 mL), refluxed for 3 h,Diluted with ethyl acetate (50 mL * 3), washed with brine, dried over anhydrous sodium sulfate, filtered and concentrated to dryness under reduced pressure.The product was purified by column chromatography (ethyl acetate: petroleum ether = 1: 5 to 1: 1) to obtain pure product.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Methoxy-5-nitrobenzonitrile, and friends who are interested can also refer to it.

Reference:
Patent; CHINA MEDICAL UNIVERSITY; MENG, FANHAO; ZHANG, TINGJIAN; WU, QINGXIA; WANG, LIN; SUN, QI; LIANG, JINGWEI; HE, XIN; (22 pag.)CN105294584; (2016); A;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Reference of 7153-22-2, The chemical industry reduces the impact on the environment during synthesis 7153-22-2, name is Ethyl 4-cyanobenzoate, I believe this compound will play a more active role in future production and life.

Ethyl 4-cyanobenzoate (10.0 g, 57.1 mmol) and propiononitrile (8.1 ml, 110 mmol) were dissolved in tetrahydrofuran (170 mL) and bis-(trimethylsilyl)lithiumamide (1.0 m in tetrahydrofuran, 120 mL, 120 mmol) was added to this solution dropwise at ambient temperature. The reaction mixture was allowed to stir overnight. The reaction mixture was quenched by addition of water and extracted with dichloromethane. The organic phase was discarded. The product-containing aqueous phase was acidified with aqueous hydrochloric acid solution (6 M) and extracted with dichloromethane (2x). The combined organic phase extracts were washed with water, dried over sodium sulfate and concentrated. The residue was resuspended in diethylether and vigorously stirred. The remaining solid was filtered, washed with diethylether and dried. The product (7.83 g, 75% yield) was used in the next step without further purification. LC-MS (method 9): Rt = 0.70 min; MS (ESIneg): m/z = 183 [M-H]”1H-NMR (400 MHz, dimethylsulfoxide-d6) delta [ppm]: 1.473 (3.09), 1.491 (3.18), 1.669 (2.16), 1.892 (16.00), 5.178 (0.78), 5.196 (0.77), 7.616 (0.53), 7.637 (0.59), 7.736 (3.94), 7.757 (4.82), 7.950 (4.87), 7.971 (4.05), 8.047 (0.42), 8.073 (1.09), 8.094 (1.90), 8.155 (2.02), 8.176 (1.19), 11.149 (1.39).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Ethyl 4-cyanobenzoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BAYER AKTIENGESELLSCHAFT; BAYER PHARMA AKTIENGESELLSCHAFT; GIESE, Anja; KLAR, Juergen; EHRMANN, Alexander; WILLWACHER, Jens; ENGEL, David; DIESKAU, Andre Philippe; KAHNERT, Antje; GROMOV, Alexey; SCHMECK, Carsten; LINDNER, Niels; MUeLLER, Thomas; ANDREEVSKI, Anna Lena; DREHER, Jan; COLLINS, Karl; (861 pag.)WO2018/69222; (2018); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 1187-42-4, name is Diaminomaleonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1187-42-4, SDS of cas: 1187-42-4

,2-bis(4-chlorophenyl)ethane-l,2-dione, (20 g, 71.65 mmol), diaminomaleonitrile (8.5 g,78.82 mmol) and acetic acid (6 ml) in ethanol (140 ml) and water (93 ml) were heated at75 °C overnight. The reaction mixture was cooled, and water was added. The precipitatewas filtered and washed with ethanol and then ether. The crude product was dissolved inDCM and treated with activated charcoal, then filtered through celite. After evaporation, asolid was formed and recrystallized from DCM/ethanol to give a pale yellow solid (17.3 g,69percent).JH NMR (400 MHz) 8 7.49 (d, 4H), 7.38 (d, 4H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Diaminomaleonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ASTRAZENECA AB; WO2004/111039; (2004); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

These common heterocyclic compound, 621-50-1, name is 2-(3-Nitrophenyl)acetonitrile, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 621-50-1

NaH (4.34 g, 90.4 mmol) was stirred in a solvent of tetrahydrofuran (20 mL) at 0 C. The reaction solution was slowly added with 2-(3-nitrophenyl)acetonitrile (2.2 g, 13.6 mmol), and stirred for about 30 minutes at 0 C. The reaction solution was added with MeI (6.67 mL, 107 mmol), followed by stirring for about 12 hours at room temperature. The reaction mixture was added with an ice water. The organic layer was separated out and the aqueous layer was extracted with ethyl acetate. The organic layer was dried over anhydrous sodium sulfate, filtered, and concentrated under reduced pressure. The concentrated compound was purified using silica gel chromatography (EA:HEX=1:9) to obtain the title compound (0.6 g, 23%). 1H-NMR Spectrum (300 MHz, DMSO-d6): delta 8.33 (s, 1H), 8.22 (d, 1H), 7.91 (d, 1H), 7.65 (t, 1H), 1.81 (s, 6H). MS (ESI+, m/z): 191 [M+H]+

The synthetic route of 2-(3-Nitrophenyl)acetonitrile has been constantly updated, and we look forward to future research findings.

Reference:
Patent; HANMI PHARM. CO., LTD.; Bae, In Hwan; Han, Sang Mi; Kwak, Eun Joo; Ahn, Young Gil; Suh, Kwee Hyun; US2015/191450; (2015); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 1813-33-8, These common heterocyclic compound, 1813-33-8, name is 2-Chloro-4-(trifluoromethyl)benzonitrile, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To commercially available 2-chloro-4-trifluoromethylbenzonitrile 13 (0.5 ml, 3.6 mmol) dimethylamine (4equiv., 0.95 ml) was added and the solution was heated in closed vessel at 80C overnight. The reaction was evaporated and the residue was dissolved in AcOEt and washed with water and brine. The organic phase was evaporated obtaining 730 mg of a pale yellow oil. Yield = 94% ‘HNMR (CDC13, 200 MHz) delta 3.13 (6H, s), 7.05 (1H, bs), 7.59 (1H, dd, J = 8.4 Hz, J’ = 0.6 Hz), 7.99 (1H, bs)

Statistics shows that 2-Chloro-4-(trifluoromethyl)benzonitrile is playing an increasingly important role. we look forward to future research findings about 1813-33-8.

Reference:
Patent; PHARMESTE S.R.L.; NAPOLETANO, Mauro; TREVISANI, Marcello; PAVANI, Maria Giovanna; FRUTTAROLO, Francesca; WO2011/120604; (2011); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts