Month: June 2021

Adding a certain compound to certain chemical reactions, such as: 4592-94-3, name is 3-(4-Bromophenyl)-3-oxopropanenitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4592-94-3, Quality Control of 3-(4-Bromophenyl)-3-oxopropanenitrile

General procedure: A mixture of 1,2-bis(bromomethyl)benzene (1.0 mmol), alpha-cyanoacetophenone (1.0 mmol) and Cs2CO3 (3.0 mmol) in DMSO (5 mL) was stirred at 80 C for 4 h till almost full conversion of the substrates by TLC analysis. The resulting mixture was dropped into 100 mL 1 M HCl (aq) and extracted with EtOAc three times (3×50 mL). The organic extract was dried with Na2SO4, filtered and concentrated. The crude product was purified by column chromatography on silica gel (eluent: petroleum ether/EtOAc=50/1) to afford the product 3aa as a white solid.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Wang, Jungang; Xiang, Jiachen; Wang, Miao; Guan, Jie; Wu, Anxin; Tetrahedron; vol. 70; 7; (2014); p. 1412 – 1417;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 79463-77-7, The chemical industry reduces the impact on the environment during synthesis 79463-77-7, name is Diphenyl N-cyanocarbonimidate, I believe this compound will play a more active role in future production and life.

Diphenyl N-cyanocarbonimidate [79463-77-7] (200 mg, 0.81 mmol) and 3,4-dimethoxyaniline [6315- 89-5] (137 mg, 0.89 mmol) were dissolved in DCM (2 mL) and 2-propanol (2 mL) and DIPEA (159 mg, 1.22 mmol) were added and the reaction mixture was stirred at r.t. for ~1 h. The mixture was concentrated in vacuo and the residue was purified by flash column chromatography on silica (gradient elution with 15 – 100% EtOAc/hexane) to afford the title compound (198 mg, 82%) as a white solid. dH (300 MHz, DMSO -d6) 10.65 (s, 1H), 7.51 – 7.37 (m, 2H), 7.36 – 7.22 (m, 3H), 7.09 (d, J 1.8 Hz, 1H), 7.03 – 6.91 (m, 2H), 3.75 (s, 6H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Diphenyl N-cyanocarbonimidate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; UCB BIOPHARMA SRL; CHOVATIA, Prafulkumar Tulshibhai; CONNELLY, Rickki Lee; FRANKLIN, Richard Jeremy; HASLETT, Gregory William; HENRY, Alistair James; MADDEN, James; NEUSS, Judi Charlotte; NORMAN, Timothy John; PHILPS, Oliver; PITT, William Ross; RAMPALAKOS, Konstantinos; SELBY, Matthew Duncan; SELVARATNAM, Suganthan; TRANI, Giancarlo; ZHU, Zhaoning; (768 pag.)WO2019/243550; (2019); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 24056-34-6, name is 4-Hydroxycyclohexanecarbonitrile, A new synthetic method of this compound is introduced below., HPLC of Formula: C7H11NO

a 4-[[(1,1-Dimethylethyl)diphenylsilyl]oxy]cyclohexanecarbonitrile To a solution maintained at 10 C., under nitrogen, of 11 g (87.8 mmoles) of 4-hydroxycyclohexanecarbonitrile (prepared according to Praefcke K. and Schmidt D., Z. Naturforsch (1980) 35b, 1451-4) in 50 ml of N,N-dimethylformamide, there is added dropwise 26.6 g (96.8 mmoles) of 1,1-dimethylethyldiphenylsilyl chloride, then by portions, 13.1 g (190 mmoles) of imidazole. Stirring is continued at room temperature during 3 days, before pouring the reaction mixture in water saturated with NaCl. The product is extracted with a hexane-ether (1:1) mixture. The organic phase is washed with a N HCl solution, then with water saturated with NaCl, before drying and concentration. The residue is purified by chromatography on a column of silica in dichloromethane to give 26.5 g (yield=85.9%) of a colorless thick oil. I.R. (film): nu (C N)=2240 cm-1. N.M.R. (CDCl3): delta=0.7 (9H,s); 0.9-1.90 (8H,m); 2.1 (1H,m); 3.35 (1H,m); 6.8-7.45 (10H,m).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Lipha Lyonnaise Industrielle Pharmaceutique; US5387709; (1995); A;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 38487-86-4, These common heterocyclic compound, 38487-86-4, name is 2-Amino-4-chlorobenzonitrile, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

5-Chloro-2-(lH-tetrazol-5-yl)aniline: 2-Amino-4-chlorobenzonitrile (1000 mg, 6.6 mmol), sodium azide (555 mg, 8.5 mmol) and triethylamine hydrochloride (1175 mg, 8.5 mmol) were taken up in 15 mL of toluene. The suspension was heated to 100 0C overnight. After cooling, the reaction mixture was washed 3 times with 5 mL portions of water. The combined aqueous fractions were acidified with concentrated hydrochloric acid. The desired 5-Chloro-2-(lH-tetrazol-5-yl)aniline precipitated from aqueous solution and was isolated by filtration (1090 mg, 85% yield). 1H NMR (500 MHz, DMSO-d6) delta 7.73 (d, IH), 6.97 (d, IH), 6.74 (dd, IH); MS (electrospray) m/z 196 (M+H).

Statistics shows that 2-Amino-4-chlorobenzonitrile is playing an increasingly important role. we look forward to future research findings about 38487-86-4.

Reference:
Patent; EXELIXIS, INC.; WO2007/44724; (2007); A2;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6011-14-9, name is 2-Aminoacetonitrile hydrochloride, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 6011-14-9

General procedure: N-protected amino acid was dissolved in dichloromethane (DCM). 1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC.HCl, 1.3 eq.) and hydroxybenzotriazole (HOBt ·xH2O, 1.3 eq.) were added at 0 C and the mixture was stirred for 50 min, after which thecorresponding amine (1.3 eq.) and N,N-Diisopropylethylamine (DIPEA, 1.3 eq.) were added at 0C. After stirring overnight, the mixture was washed with a 5% potassium sulfate solution(KHSO4), a 5% sodium bicarbonate solution (NaHCO3) and with water. After drying over sodiumsulfate (Na2SO4) and evaporation of the solvent, the residue was purified via columnchromatography.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6011-14-9.

Reference:
Article; Silva, Daniel G.; Ribeiro, Jean F.R.; De Vita, Daniela; Cianni, Lorenzo; Franco, Caio Haddad; Freitas-Junior, Lucio H.; Moraes, Carolina Borsoi; Rocha, Josmar R.; Burtoloso, Antonio C.B.; Kenny, Peter W.; Leitao, Andrei; Montanari, Carlos A.; Bioorganic and Medicinal Chemistry Letters; vol. 27; 22; (2017); p. 5031 – 5035;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Synthetic Route of 874-97-5, A common heterocyclic compound, 874-97-5, name is 3-Cyanobenzyl alcohol, molecular formula is C8H7NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Add tert-butyl-chloro-dimethyl-silane (11.9 g, 78.9 mmol) to a solution of 3-hydroxymethyl-benzonitrile (10.00 g, 75.10 mmol) and imidazole (6.14 g, 90.1 mmol) in dichloromethane (1 L) and stir. After 18 hours, pour reaction into 1% hydrochloric acid. Remove organic layer, dry with sodium sulfate, filter, and concentrate under EPO reduced pressure to yield the title product as a clear yellow oil (18.5 g, 99%): 1H NMR (CDCl3) delta 0.12 (s, 6H), 0.95 (s, 9H), 4.75 (s, 2H), 7.43 (t, IH), 7.53 (d, 2H), 7.63 (s, IH).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ELI LILLY AND COMPANY; WO2006/57860; (2006); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 115279-57-7, name is 2-(4-Aminophenyl)-2-methylpropanenitrile, A new synthetic method of this compound is introduced below., Recommanded Product: 115279-57-7

N-Chloro-succinimide (91.0 mg; 0.68 mmol) was added to a solution of 2-(4-amino- phenyl)-2-methyl-propionitrile (100 mg; 0.62 mmol), prepared as described in 1(B), in isopropanol (3 mL). The resulting solution was stirred at reflux for Ih. Then the solvent was evaporated under vacuum and the crude was portioned between EtOAc and H2O. The layers were separated and the organic phase was washed with brine, dried over Na2SO4, filtrated and concentrated under reduced pressure. The crude was purified by chromatography [SiO2, DCM] to afford the title compound as an orange oil (58.0 mg; 48% yield).1H NMR (300 MHz, CDC13) delta(ppm): 7.34 (d, 1 H), 7.18 (dd, 1 H), 6.78 (d, 1 H), 3.73(br. s., 2 H), 1.68 (s, 6 H).LCMS (RT): 4.63 min (Method B); MS (ES+) gave m/z: 195.05 (MH+).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ADDEX PHARMA SA; WO2008/117175; (2008); A2;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Reference of 5414-21-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 5414-21-1, name is 5-Bromovaleronitrile, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: A solution of m-tolylmagnesium bromide 26, prepared from 416 muL of 3-bromotoluene and 83 mg of magnesium turnings in anhydrous THF (3 mL), was added dropwise under inert atmosphere to a solution of 5-bromovaleronitrile (400 muL, 3.43 mmol) in anhydrous THF (3 mL). The mixture was stirred at room temperature for 1 h, quenched with a saturated aqueous solution of NaHCO3 (3 mL) and extracted with dichloromethane (3 * 10 mL). The combined organic layers were dried over anhydrous sodium sulphate, filtered and concentrated under reduced pressure. The crude residue was purified by silica gel column chromatography (dichloromethane/methanol 95:5) to provide the compound 7 as a yellow oil (225 mg, 38% yield). Rf = 0.40 (dichloromethane/methanol 95:5). 1H NMR: delta 1.63-1.71 (m, 2H), 1.79-1.87 (m, 2H), 2.37 (s, 3H), 2.60-2.66 (m, 2H), 3.80-3.86 (m, 2H), 7.18-7.29 (m, 2H), 7.51-7.54 (m, 1H), 7.61-7.62 (m, 1H). 13C NMR: delta 20.0, 21.7, 22.1, 27.4, 50.1, 123.3, 126.8, 128.3, 130.5, 138.1, 140.4, 166.2. MS (ESI) m/z [M+H]+ Calcd for C12H16N+: 174.13. Found: 174.2.

The chemical industry reduces the impact on the environment during synthesis 5-Bromovaleronitrile. I believe this compound will play a more active role in future production and life.

Reference:
Article; Matera, Carlo; Quadri, Marta; Sciaccaluga, Miriam; Pome, Diego Yuri; Fasoli, Francesca; De Amici, Marco; Fucile, Sergio; Gotti, Cecilia; Dallanoce, Clelia; Grazioso, Giovanni; European Journal of Medicinal Chemistry; vol. 108; (2016); p. 392 – 405;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16532-79-9, name is 4-Bromophenylacetonitrile, A new synthetic method of this compound is introduced below., Formula: C8H6BrN

This compound was prepared via Method C using 5-amino-pyridine-2-carboxylic acid methylamide prepared by Method N and 2-Methyl-2-[4-(4,4,5,5-tetramethyl-[l,3,2]dioxaborolan-2-yl)- phenyl]-propionitrile prepared by Method O followed by Method R. Method O: [00305] NaH (2.5 eq.) is added to (4-Bromo-phenyl)-acetonitrile (leq) in DMF at O0C. The reaction mixture is stirred for 200C. MeI is added to the resulting solution at O0C. The resulting mixture is stirred at room temperature for 19hrs. EtOAc and water are added to the reaction. The organic phases are isolated, dried over MgSO4, filtered and evaporated under vacuum to afford the expected product. Purification by flash chromatography may be required to afford the pure product.

The synthetic route of 16532-79-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GALAPAGOS NV; MENET, Christel, Jeanne, Marie; BLANC, Javier; HODGES, Alastair, James; BURLI, Roland, Werner; BRECCIA, Perla; BLACKABY, Wesley, Peter; VAN ROMPAEY, Luc, Juliaan, Corina; FLETCHER, Stephen, Robert; WO2010/10184; (2010); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 455-18-5, name is 4-(Trifluoromethyl)benzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 455-18-5, Computed Properties of C8H4F3N

General procedure: To an oven-dried 15 mL sealed tube were added 2-aminophenylmethanol 1 (0.425 mmol), benzonitrile 2(0.25 mmol), Ru cat. b (1.94 mg, 1 mol%), and KOtBu (14.02 mg, 0.5equiv) intamyl alcohol (1 mL) under an air atmosphere. The sealedtube was capped and heated at 130C for 2 h. The reaction mixturewas cooled down to room temperature and directly concentratedunder vacuum. The crude mixture was puried by preparative thin-layer-chromatography (petroleum ether/ethyl acetate 20/1) togive the desired product 3 or 4.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-(Trifluoromethyl)benzonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Wan, Xiao-Min; Liu, Zi-Lin; Liu, Wan-Qing; Cao, Xiao-Niu; Zhu, Xinju; Zhao, Xue-Mei; Song, Bing; Hao, Xin-Qi; Liu, Guoji; Tetrahedron; vol. 75; 18; (2019); p. 2697 – 2705;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts