Month: September 2021

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 868-54-2, name is 2-Aminoprop-1-ene-1,1,3-tricarbonitrile, A new synthetic method of this compound is introduced below., SDS of cas: 868-54-2

General procedure: In a 25 mL round bottom flask, a mixture of 2,3-dihydroxynaphthalene (1 mmol),aldehyde (1 mmol), malononitrile (1 mmol) or 2-aminoprop-1-ene-1,1,3-tricarbonitrile (1 mmol) and guanidine hydrochloride (10 mol%) were taken, and the mixture was stirred at 100C in an oil bath for an appropriate amount of time as indicated in Tables 3 and 4. The progress of the reaction was monitored by thin-layerchromatography (TLC). After completion, the reaction mixture was cooled to room temperature and CH3CN (5 mL) was added, and then a precipitate was allowed to form. The precipitate was filtered, washed with CH3CN and dried. The crude product was stirred for 5 min in boiling EtOH,and the resulting precipitate was filtered. The product 4 and 9 thus obtained was found to be pure upon 1H and 13CNMR, mass spectra, elemental analyses, and TLC examination.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Olyaei, Abolfazl; Shahsavari, Mohammad Sadegh; Sadeghpour, Mahdieh; Research on Chemical Intermediates; vol. 44; 2; (2018); p. 943 – 956;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 6574-97-6, These common heterocyclic compound, 6574-97-6, name is 2,3-Dichlorobenzonitrile, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Take dried 2L flask was refluxed for four devices, under nitrogen, into sulfolane 1200g, 280g of potassium fluoride, tetramethylammonium chloride 50g, 2,3- dichlorobenzonitrile 688g, open stirring slowly raised to 210 reaction was incubated 8h, the control sample, the end of the reaction raw material ?1percent.The reaction solution was added to a short column distillation, to give 2-fluoro-3-chlorobenzonitrile 560g, content ?99percent, yield 90percent.

The synthetic route of 6574-97-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zhejiang Yongtai Technology Co ., Ltd; Zhang, xing; Shu, zhujin; (10 pag.)CN104529729; (2016); B;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 939-80-0, name is 4-Chloro-3-nitrobenzonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Safety of 4-Chloro-3-nitrobenzonitrile

[00200] 4-(2,5-Difluorophenoxy)-3-nitrobenzonitrile 21. A solution of 4-chloro-3- nitrobenzonitrile (5 g) in THF (200 mL) at room temperature was treated with K2CO3 (19 g), followed by 2,5-difluorophenol (3.7 g). After stirring at room temperature for 18 hrs, the solid was filtered off and rinsed with copious amounts of EtOAc. The filtrate was washed sequentially with saturated aqueous NaHCU3 solution, water, and saturated aqueous NaCl solution, dried over anhydrous Na2SO4, filtered, and concentrated in vacuo. The residual was triturated with hexanes and collected by suction to furnish the desired product 21, which was used directly in the next step without further purification.

The synthetic route of 939-80-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AXIKIN PHARMACEUTICALS, INC.; LY, Tai, Wei; TRAN, Marie Chantal, Siu-ying; BAAUM, Erik, Dean; WO2010/123956; (2010); A2;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

1885-29-6, name is 2-Aminobenzonitrile, belongs to nitriles-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. name: 2-Aminobenzonitrile

b) 2- {[(2,2-Dimethyl-4,6-dioxo-1,3-dioxan-5-ylidene)methyl]amino}benzonitrile To a solution of 2-aminobenzonitrile (3 g) in acetonitrile (30 ML) was added 5- (methoxymethylene) -2, 2-DIMETHYL-1, 3-dioxane-4,6-dione (4.73 g) in acetonitrile (10 mL). After 2 minutes of stirring, a fine suspension developed which was filtered to afford the titled product (4.3 g). H NMR (400 MHZ, D6-DMSO) 6 11.60 (1H, d), 8. 72 (1H, d), 7.93 (2H, t), 7.79 (1H, TD), 7.44 (1H, td), 1.70 (6H, s).

The synthetic route of 1885-29-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; WO2004/113303; (2004); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 654-70-6, name is 4-Cyano-3-trifluoromethylaniline, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 654-70-6

A mixture of 750 mg of the compound, produced under 7b, and 920 mg of 4-amino-2-(trifluoromethyl)benzonitrile in 10 ml of ethanol was mixed under a nitrogen atmosphere with 0.5 g of an activated molecular sieve (0.3 nm) and stirred for 2 days at 90 C. For working-up, the molecular sieve was filtered off after cooling, washed with ethanol, and the combined ethanol solutions were concentrated by evaporation. The residue was taken up in ethyl acetate and washed with water as well as saturated sodium chloride solution. After drying on sodium sulfate and concentration by evaporation, it was chromatographed on silica gel with ethyl acetate/hexane, and 731 mg of the title compound was thus obtained as a colorless oil. ESI-MS: 320

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 654-70-6.

Reference:
Patent; Schering AG; US2004/9969; (2004); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Application of 1835-65-0, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1835-65-0, name is 3,4,5,6-Tetrafluorophthalonitrile, This compound has unique chemical properties. The synthetic route is as follows.

Thetetrafluoro Phthalo nitrile 6.0 g (30mmol), and the potassium fluoride 15 g(1.2eq.) and acetonitrile 20ml were put in the reactor in which the entrance of100ml placing the thermometer was 4 and it was stirred and it cooled to 0. Here, alpha – naphthol 4.3 g(1.0eq.) waslittle by little injected. In 5 orless the mixture after the input end, after it reacted at 1 hour thetemperature was increased to 20 and itreacted 2 hours at 20 through 25. Thereaction mixture was emitted to water after the completion of reaction and the segregatedsolid was filtered and it took out. The obtained crude product was well wipedoff with the methanol and the compound (4-3) 7.2g of the white solid wasobtained (the yield 74percent).

The chemical industry reduces the impact on the environment during synthesis 3,4,5,6-Tetrafluorophthalonitrile. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Yamada Kagaku Kogyo Corporation; Yosuke, Manabe; Satoshi, Hayashi; (33 pag.)KR2015/107729; (2015); A;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 1528-41-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1528-41-2, name is Ethyl 2-(4-cyanophenyl)acetate belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 1.0 g of 3,3-dimethylcyclohexanone (S6; 7.9 mmol), hydroxylamine hydrochloride (0.66 g,9.5 mmol), 10 mL of ethanol, and 1.6 g of K2CO3 (12 mmol) was heated to 70 C for 64 hours. Themixture was concentrated suspended in 10 mL of water, the extracted three times each with 30 mL ofEtOAc. The extracts were combined and concentrated to provide 1.2 g of 3,3-dimethylcyclohexanoneoxime (S7) that was used crude. To a 0 C solution of S7 (0.20 g, 1.4 mmol) in 2 mL of THF was added dropwise 1.6 M BuLi in hexanes(1.8 mL, 2.8 mmol). The mixture stirred for 30 minutes at room temperature, then ethyl 2-(4-cyanophenyl)acetate (0.27 g, 1.4 mmol) was added. After stirring for 1 hour, 0.7 mL of concentratedH2SO4 was added. After stirring for 1 hour, 25 mL of water was added and the mixture was extractedthree times each with 15 mL of EtOAc. The extracts were concentrated and the residue was purified firstby silica chromatography (0-50% EtOAc in heptanes), then by preparative HPLC (C18 column 10-90%MeCN in H2O, both 0.1% v/v formic acid) or give 41 mg of 16.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Ethyl 2-(4-cyanophenyl)acetate, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Meyers, Kenneth; Cogan, Derek A.; Burke, Jennifer; Arenas, Raquel; Balestra, Michael; Brown, Nicholas F.; Chen, Zhidong; Cerny, Matthew A.; Clifford, Holly E.; Colombo, Federico; Fader, Lee; Frederick, Kosea S.; Guo, Xin; Goldberg, Daniel; Hornberger, Keith R.; Kugler, Stanley; Lord, John; Marshall, Daniel R.; Moss, Neil; Parmentier, Jean-Huges; Richman, Jeremy R.; Schmenk, Jennifer; Weldon, Steven M.; Yu, Maolin; Zhang, Michael; Bioorganic and Medicinal Chemistry Letters; vol. 28; 5; (2018); p. 979 – 984;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Electric Literature of 1885-38-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1885-38-7, name is (E)-Cinnamonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

(b) (2E)-3-Phenyl-2-propenimidamide; Cinnanionitrile (25.0 g, 194 mmol) was dissolved in EtOH. The solution was cooled to 0 0C and HCl gas bubbled through the solution for 30 minutes. The solution was stirred at ambient temperature for 1 h and then concentrated under vacuum. The residue was dissolved in EtOH (100 niL), cooled to 00C and a solution of NH3/Me0H (7M, 69 mL, 484 mmol) was added dropwise through an addition funnel. Once added, the solution was allowed to warm to ambient temperature and stirred overnight and the resulting NH4Cl was filtered off. The solution was concentrated under vacuum and the resulting product was used without further purification (28.6 g crude). LC-MS: m/z 147.4 (MH+).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (E)-Cinnamonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GLAXO GROUP LIMITED; WO2008/3690; (2008); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Electric Literature of 32446-66-5, The chemical industry reduces the impact on the environment during synthesis 32446-66-5, name is 4,4′-Dicyanobenzophenone, I believe this compound will play a more active role in future production and life.

EXAMPLE 2; PREPARATION OF 4,4′-(HYDROXY METHYLENE)BISBENZONITRILE OF FORMULA IV 200 ml of methanol was taken into a round bottom flask followed by charging 40 g of 4,4-dicyanobenzophenone and stirring for about 10 minutes. 3.28 g of sodium borohydride was added slowly to the above suspension at 0-5 C. followed by stirring at 25-30 C. for 30 minutes, and the formed solution was neutralized with 25 ml of glacial acetic acid to a pH of 6.33. 800 ml of water was charged to the above-neutralized suspension and stirred for 30 minutes, and the precipitate was filtered, washed with 400 ml of water and finally subjected to drying at 55-60 C. under vacuum for 4 hours to afford 40 g of title compound having a purity by HPLC of 99.36% and a water content by the Karl Fischer method of 0.27%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4,4′-Dicyanobenzophenone, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Palle, Venkata Raghavendra Acharyulu; Kalaria, Ashok Jerambhai; Shelke, Sandip Ashok; US2007/100149; (2007); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Reference of 5414-21-1, These common heterocyclic compound, 5414-21-1, name is 5-Bromovaleronitrile, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

CH3Se3CH3 (100 mg, 0.53 mmol, Aldrich) was added to a solution of NaBH4 (60 mg, 1.59 mmol) in 5 ml of absolute EtOH under N2. After 5 min of vigorous reaction the colour of the solution changed from yellow to white. 5-Bromopentanenitrile (0.17 g, 1.06 mmol, Acros) was then added and stirred for 2.5 h. Et2O (10 ml) was added, the reaction mixture was washed with 5 ml each of water and brine, extracted with 2 x 25 ml of Et2O, and dried (MgSO4). The solvent was removed to give 10b as a yellow oil (107 mg, 57% yield). EI-ToF-MS (Fig. 2), m/z (rel. int.): 177 [M]+ (1200), 175 (28), 173 (15), 135 (10), 109 [CH3SeCH2]+ (33), 107 (17), 96 [CH3SeH]+ (27), 94 [CH2Se]+ (21), 93 [CHSe]+ (25), 82 (22), 55 (4). 1H NMR (500 MHz, CDCl3): delta1.75-1.88 (m, 4H, CH2CH2), 2.00 (s, 3H, CH3Se), 2.38 (t, 2H, J = 6.8 Hz, CH2CN), 2.57 (t, 2H, J = 6.9 Hz, CH2Se).

The synthetic route of 5414-21-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Matich, Adam J.; McKenzie, Marian J.; Lill, Ross E.; Brummell, David A.; McGhie, Tony K.; Chen, Ronan K.-Y.; Rowan, Daryl D.; Phytochemistry; vol. 75; (2012); p. 140 – 152;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts