Author: Jessica.F

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 623-26-7, name is Terephthalonitrile, A new synthetic method of this compound is introduced below., Recommanded Product: 623-26-7

Crude p-cyanobenzylamine was synthesized in accordance with the process described in Japanese Unexamined Patent Publication (kokai) No. 9-40630 as follows. Into a 100 ml autoclave, methanol (30 ml) and sponge nickel (R-2400, product of W.R. Grace & Co.) (1.0 g) were placed, and the internal pressure of the autoclave was elevated to 1.0 MPa by introducing hydrogen. The mixture contained in the autoclave was stirred while heating at 150 C. for one hour. Terephthalonitrile (5.0 g) and sodium hydroxide (0.1 g) were introduced into the reactor, and the internal pressure was elevated to 0.5 MPa at ambient temperature while introducing hydrogen. Under monitoring of the hydrogen absorbing rate, when the hydrogen pressure was dropped to 0.1 MPa, the pressure was elevated again to 0.5 MPa. This pressure control operation was repeated. Reaction was terminated when the hydrogen absorption ratio reached 115% of the theoretical value. From the thus-obtained reaction mixture, methanol was removed through distillation. The resultant mixture was subjected to a further distillation at a high temperature under a reduced pressure, thereby removing crude p-cyanobenzylamine. Through high-performance liquid chromatographic analysis of the distillate, the p-cyanobenzylamine content and the p-xylylenediamine content were found to be 93 mass % and 7 mass %, respectively.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Showa Denko K.K.; US6392083; (2002); B1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 6011-14-9, name is 2-Aminoacetonitrile hydrochloride, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6011-14-9, 6011-14-9

A solution of 4-(2-((6-carboxy-2-(3,4-dichloro-5-methyl-1H-pyrrole-2-carboxamido)benzo[d]thiazol-4- yl)oxy)ethyl)morpholin-4-ium chloride (Example 10) (19 mg, 0.035 mmol) in N,N-dimethylformamide (4 mL) was cooled to 0 C and then EDC (8 mg, 0.042 mmol), HOBt (6 mg, 0.046 mmol) and N- methylmorpholine (12 muL, 0.106 mmol) were added and the reaction mixture stirred for 20 min at 0 C. Then aminoacetonitrile hydrochloride (5 mg, 0.053 mmol) was added and reaction mixture stirred overnight at room temperature. The solvent was evaporated in vacuo, to the residue ethyl acetate (10 mL) and 1M HCl (10 mL) were added after which the precipitate formed. The solid was filtered off and dried. Yield: 14 mg (68.0%); beige solid. (0686) 1H NMR (400 MHz, DMSO-d6) d 2.29 (s, 3H), 3.25-3.34 (m, 2H), 3.62-3.73 (m, 4H), 3.76-3.88 (m, 2H), 4.01-4.10 (m, 2H), 4.36 (d, J = 5.4 Hz, 2H), 4.71 (t, 2H), 7.62 (d, J = 1.5 Hz, 1H), 8.21 (d, J = 0.5 Hz, 1H), 9.40 (t, J = 5.5 Hz, 1H), 10.93 (s, 1H), 12.20 (s, 1H), 12.78 (s, 1H). (0687) HRMS (ESI+) m/z for C22H23Cl2N6O4S ([M+H]+): calculated 537.0873, found 537.0861.HPLC: tr 4.313 min (96.9 % at 254 nm, 97.7 % at 280 nm), method A

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Aminoacetonitrile hydrochloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; UNIVERZA V LJUBLJANI; MTA SZEGEDI BIOLOGIAI KUTATOKOeZPONT; HELSINGIN YLIOPISTO; TOMA?IC, Tihomir; ZIDAR, Nace; DURCIK, Martina; ILA?, Janez; ZEGA, Anamarija; DURANTE CRUZ, Cristina; TAMMELA, Paeivi; PAL, Csaba; NYERGES, Akos Jozsef; KIKELJ, Danijel; MA?IC, Lucija Peterlin; (116 pag.)WO2020/48949; (2020); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 60702-69-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 60702-69-4, name is 2-Chloro-4-fluorobenzonitrile, This compound has unique chemical properties. The synthetic route is as follows.

EXAMPLE 23A; 2-chloro-4-fluoro-5-nitrobenzonitrile; To a solution of 2-chloro-4-fluorobenzonitrile (10.1 g, 64.9 mmol) in concentrated sulfuric acid (20 mL) was added fuming nitric acid (5.80 ml, 130 mmol) at room temperature slowly and the mixture was stirred for 60 minutes. The solution was then poured into ice-water and stirred for 20 minutes. The precipitate was filtered, washed with more water and air-dried to afford the crude material, which was purified by sublimation to afford the title compound. .H NMR (300 MHz, dimethylsulfoxide-d6) delta ppm 8.97 (d, J = 8.09 Hz, 1 H) 8.30 (d, J = 11.03 Hz, 1 H).

The chemical industry reduces the impact on the environment during synthesis 2-Chloro-4-fluorobenzonitrile. I believe this compound will play a more active role in future production and life.

Reference:
Patent; ABBOTT LABORATORIES; ABBOTT LABORATORIES TRADING (SHANGHAI) COMPANY, LTD.; XU, Xiangdong; DINGES, Jurgent; HASVOLD, Lisa; LONGENECKER, Kenton, L.; WO2012/45196; (2012); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 935-02-4, name is 3-Phenylpropiolonitrile, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 935-02-4

4.4.1 (Z+E)-3-(3-Methyl-2-selenoxo-2,3-dihydro-1H-imidazol-1-yl)-3-phenyl-2-propenenitrile (4a) To a mixture of acetylene 2 (64.0 mg, 0.5 mmol) and Se (40.0 mg, 0.5 mmol) in MeCN (1 mL) was added 1-methylimidazole (1a; 41.0 mg, 0.5 mmol) in MeCN (1 mL). The mixture was stirred at 82 C for 5 h. After cooling to 20-25 C, the solvent was removed and column chromatography afforded selone (Z)-4a (46 mg, 39%) as a yellow microcrystalline powder, mp 208-209 C (ethanol). Initial imidazole 1a was recovered (7 mg, conversion was 83%). Initial Se was recovered (20 mg, conversion was 50%). Z:E-isomers ratio was 5:1 [(E)-isomer, 5%, data 1H NMR]. (Z)-Isomer: 1H NMR (400.13 MHz, CDCl3): delta=7.50-7.27 [m, 5H, Ho,m,p from C(6)-Ph], 7.07 (s, 1H, 4-H), 6.98 (s, 1H, 5-H), 6.12 (s, 1H, 7-H), 3.76 (s, 3H, N-CH3) ppm. 13C NMR (100.62 MHz, CDCl3): delta=159.2 (C-2), 154.9 (C-6), 132.4 [Ci from C(6)-Ph], 132.0 [Cp from C(6)-Ph], 129.3 [Cm from C(6)-Ph], 127.0 [Co from C(6)-Ph], 121.7 (C-4), 119.3 (C-5), 114.5 (CN), 97.7 (C-7), 37.5 (N-CH3) ppm. (E)-Isomer: 1H NMR (400.13 MHz, CDCl3): delta=7.50-7.45 [m, 5H, Ho,m,p from C(6)-Ph], 6.94 (s, 1H, 7-H), 6.90 (s, 1H, 4-H), 6.65 (s, 1H, 5-H), 3.73 (s, 3H, N-CH3) ppm. IR (KBr): 2222 (CN), 1622 (C=C), 1368 (C=Se) cm-1. Anal. Calcd for C13H11N3Se (288.21): C, 54.18; H, 3.85; N, 14.58; Se, 27.40. Found: C, 54.50; H, 3.99; N, 14.52; Se, 27.07.

According to the analysis of related databases, 935-02-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Belyaeva, Kseniya V.; Andriyankova, Ludmila V.; Nikitina, Lina P.; Mal’Kina, Anastasiya G.; Afonin, Andrei V.; Ushakov, Igor A.; Bagryanskaya, Irina Yu.; Trofimov, Boris A.; Tetrahedron; vol. 70; 5; (2014); p. 1091 – 1098;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Electric Literature of 4640-66-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4640-66-8, name is 4-Chlorophenacylcyanide belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a 0.5-2.0ml vial with 1 mmol ketone (1 eq) issolved in 2-pentanol (1.66 M) was added 1.1 eq of aromatic aldehyde and catalytic piperidine (0.08 eq), stirring vigorously. After heating under muWave for 15min at 120 C, the reaction was cooled to r.t. and precipitate was vacuum filtered and washed with minimal, cold hexanes. After drying under vacuum, solid was analyzed via NMR, IR, and mp.

The synthetic route of 4-Chlorophenacylcyanide has been constantly updated, and we look forward to future research findings.

Reference:
Article; Deshpande, Shyam J.; Leger, Paul R.; Sieck, Stephen R.; Tetrahedron Letters; vol. 53; 14; (2012); p. 1772 – 1775;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 362527-61-5, name is Ethyl 3-bromo-4-cyanobenzoate, A new synthetic method of this compound is introduced below., Application In Synthesis of Ethyl 3-bromo-4-cyanobenzoate

STEP 1 : To a pressure vessel were added ethyl 3-bromo-4-cyanobenzoate (500 mg, 1.97 mmol), cesium carbonate (1.28 g, 3.94 mmol), pentan-3 -amine (688 uL, 5.90 mmol), XANTPHOS (1 14 mg, 0.20 mmol), tris(dibenzylideneacetone)dipalladium(0) (90 mg, 0.10 mmol), and dioxane (3 mL). The vessel was sealed and heated to 95 C for 15 h. After cooling to room temperature, the mixture was filtered through celite and the filter cake rinsed with ethyl acetate. The filtrate was then concentrated and the residue was purified by column chromatography (10% ethyl acetate in hexanes) to provide ethyl 4-cyano-3- (pentan-3-ylamino)benzoate (315 mg, 1.21 mmol, 61% yield) as a yellow syrup. 1H NMR (400 MHz, CDCl3): 7.43 (d, IH), 7.33 (s, I H), 7.25 (dd, IH), 4.44-4.35 (m, 3H), 3.48-3.40 (m ,1H), 1..72-1.48 (m ,4H), 1.40 (t, 3H), 0.96 (t, 6H); MS (EI) for Ci5H20N2O2: 261 (MH+).

The synthetic route of 362527-61-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; EXELIXIS, INC.; WO2009/55077; (2009); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Synthetic Route of 368-77-4, A common heterocyclic compound, 368-77-4, name is 3-(Trifluoromethyl)benzonitrile, molecular formula is C8H4F3N, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A flask equipped with a magnetic stirrer, a nitrogen inlet, a temperature probe and a condenser was charged with the 3-(trifluoromethyl)benzonitrile (compound of formula 6) (85.5 g, 0.5 mol), followed by ethanolamine (62 ml, 1 mol), CaCI (9.0 g, 0.075 mol) and xylenes (45 mL). The reaction mixture was heated to 125 C and stirred at this temperature for 24 hr. Then the reaction mixture was allowed to cool to about 40C, and transferred with DIPE (350 mL) into an extractor containing 0.1 M KH2PO4 (600 mL). The organic phase was cut and washed with water (2×400 mL), brine (200 mL), dried over Na2S04 and filtered. The solvent was then removed under reduce pressure. The obtained crude residue was distilled using 10 cm column with Rashig rings at 90 C and 5 mbarto yield oxazoline 7 (Scheme 6) as a colorless oil (83.2 g, 77%): 1 H NMR (CDCb) delta 4.09 (t, J = 9.5 Hz, 2H), 4.47 (t, J = 9.5 Hz, 2H), 7.54 (t, J = 7.8 Hz, 1 H), 7.73 (d, J = 7.8 Hz, 1 H), 8.13 (d, J = 7.8 Hz, 1 H), 8.23 (s, 1 H).

The synthetic route of 368-77-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; LEK PHARMACEUTICALS D.D.; HUMLJAN, Jan; MARAS, Nenad; WO2013/91696; (2013); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 149793-69-1, name is 3-Fluoro-5-(trifluoromethyl)benzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 149793-69-1, Recommanded Product: 149793-69-1

Synthesis of Int rmediate (1)Molecu lar Weight: 189.1 Molecu lar Weight: 276.3[00506] In a 3-neck 100 mL round-bottomed flask, 2-(dimethylamino)ethanol (2.925, 1.2 eq.) was dissolved in THF (50 mL, 10 Vol), added NaH portion wise in reaction mixture at -25C. Stirred the reaction mixture at -25C for 1 hr. Added 3-fluoro-5-(trifluoromethyl)benzonitrile (5.0 g,1.0 eq) Portion wise in reaction mixture. Reaction mixture was stirred at this temp for 2 hrs and then at RT overnight. Reaction completion was monitored on TLC using ethyl acetate: hexane (3:7) mobile phase. Reaction mixture was quenched into the ice-water slurry (250 mL) and compound was extracted in the ethyl acetate (50 mL x 3). Organic layer was washed with brine solution (50 mL x 3) followed by drying using anhydrous sodium sulphate. Organic layer was concentrated under reduced pressure to afford 6.5 g of crude compound, Yield (89.18%). This crude material was directly used for next step without purification. Mass: 276.3.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Fluoro-5-(trifluoromethyl)benzonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; KARYOPHARM THERAPEUTICS, INC.; SHECHTER, Sharon; KAUFFMAN, Michael; SANDANYAKA, Vincent, P.; SHACHAM, Sharon; WO2011/109799; (2011); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 868-54-2, name is 2-Aminoprop-1-ene-1,1,3-tricarbonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Formula: C6H4N4

General procedure: Heterocyclic ketene aminals (1 mmol), aryl aldehydes (1.2 mmol), malononitriledimer (1.5 mmol), acetic acid (1 mmol), piperidine (1 mmol) and ethanol (10 mL)were stirred at refluxing for 1 h. After completion of the reaction (confirmed by TLC),the reaction mixture was filtered to afford the crude product, which was furtherwashed with 95% ethanol to give pure product 4.

The synthetic route of 868-54-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sun, Feilong; Zhu, Fengjuan; Shao, Xusheng; Li, Zhong; Synlett; vol. 26; 16; (2015); p. 2306 – 2312;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts