Author: Jessica.F

Application of 57381-51-8,Some common heterocyclic compound, 57381-51-8, name is 4-Chloro-2-fluorobenzonitrile, molecular formula is C7H3ClFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To commercially available 2-fluoro-4-chlorobenzonitrile 15a (2 g,12.8 mmol) dimethylamine (4equiv., 3.5 ml) was added and the solution was heated in closed vessel at 80C overnight. The reaction was evaporated and the residue was dissolved in AcOEt and washed with water and brine. The residue was purified by chromatographic column using EtOAc 1 / petroleum ether 9 as eluant obtaining 1.95 g of a transparent oil. Yield = 87% ‘HNMR (DMSO, 200 MHz) delta 3.01 (6H, s), 6.91 (1H, dd, J = 8.4 Hz, J’ = 2 Hz), 7.02 (1H, d, J = 2 Hz), 7.60 (1H, d, J = 8.4 Hz)

The synthetic route of 57381-51-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PHARMESTE S.R.L.; NAPOLETANO, Mauro; TREVISANI, Marcello; PAVANI, Maria Giovanna; FRUTTAROLO, Francesca; WO2011/120604; (2011); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Application of 6330-25-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6330-25-2, name is 2-Cyano-N-methyl-acetamide, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: Pyridine was added dropwise with stirring to cyanoacetamide 2a-e(15 mmol) in a round-bottom flask until complete dissolution of the cyanoacetamide. DMAP (18 mg, 0.15 mmol) and mercaptoacetic acid (3.2 ml, 46mmol) were added to the obtained solution. The obtained mixture was refluxed for 12 h in a flask equipped with a reflux condenser,then diluted with 0.5 HCl solution (5 ml).The precipitate of 1,3-thiazolidinone 1 was filtered off and washed with hot MeCN (15 ml). When necessary, the product was additionally purified by refluxing a suspension of thiazolidine in MeCN, followed by hot filtration.(2Z)-N-Methyl-2-(4-oxo-1,3-thiazolidin-2-ylidene)acetamide (1a). Yield 1.37 g (53%), white powder, mp 238-243(decomp.). IR spectrum, nu, cm-1: 1184, 1299, 1398,1415, 1470, 1556 (C=), 1624 (C=O), 1699 (C=O), 3312 (NH). 1H NMR spectrum, delta, ppm (J, Hz): 2.58 (3H, d, J= 4.8, CH3); 3.61 (2H, s, CH2); 5.55 (1H, s, CH); 7.61 (1H, br. s, NH); 11.20 (1H, s, NH). 13C NMR spectrum, delta, ppm: 25.3; 31.9; 92.4; 151.4; 167.0; 174.0. Mass spectrum, m/z(Irel, %): 172 []+(94), 142 [-NHCH3]+(100), 114 [-NHCH3-CO]+(55), 98 (30), 86 (37), 68 (78), 42 (35), 40 (22). Found, %: C 41.70; H 4.61; N 16.51. C6H8N2O2S. Calculated, %: C 41.85; H 4.68; N 16.27

The chemical industry reduces the impact on the environment during synthesis 2-Cyano-N-methyl-acetamide. I believe this compound will play a more active role in future production and life.

Reference:
Article; Obydennov, Konstantin L.; Galushchinskiy, Aleksei N.; Kosterina, Marya F.; Glukhareva, Tatiana V.; Morzherin, Yuri Yu.; Chemistry of Heterocyclic Compounds; vol. 53; 5; (2017); p. 622 – 625; Khim. Geterotsikl. Soedin.; vol. 53; 5; (2017); p. 622 – 625,4;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 939-79-7, name is 4-Methyl-3-nitrobenzonitrile, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 4-Methyl-3-nitrobenzonitrile

General procedure: To a screw-capped vial (50 ml) were added iodobenzene 1a(1.0 mmol), substituted benzonitrile 2 (2.0 mmol), K2CO3 (276 mg,2.0 mmol), NaOH (40 mg,1.0 mmol), CuI (19 mg, 0.1 mmol), DMEDA(9 mg, 0.1 mmol), and [bmim]PF6 (14 mg, 0.05 mmol) in water(2 ml). The vial was flushed with nitrogen then sealed with the cap,and allowed to stir at 100 C for the specific reaction time. Thereaction mixture was extracted with EtOAc (315 ml). The combinedorganic extracts were dried over Na2SO4 for 12 h and evaporatedunder vacuum. The crude products were purified in a silicagel column for further purification, using PE/EtOAc (5:1) as theeluent.

According to the analysis of related databases, 939-79-7, the application of this compound in the production field has become more and more popular.

Reference:
Article; Wang, Jichao; Yin, Xinchi; Wu, Jun; Wu, Datong; Pan, Yuanjiang; Tetrahedron; vol. 69; 48; (2013); p. 10463 – 10469;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 1187-42-4, name is Diaminomaleonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1187-42-4, Recommanded Product: 1187-42-4

General procedure: AlCl3 (15 molpercent) was added to a solution of DAMN (1 mmol), ketone (1 mmol) and isocyanide (1 mmol), in 5 ml of CH3CN. The resulting mixture was stirred for an appropriate time at room temperature. After completion of the reaction, as indicated by thin-layer chromatography (TLC; ethyl acetate=n-hexane 3=1), the product was precipitated by addition of 10 ml of water. The precipitate was filtered off, washed with water, and then recrystallized from acetone. In the case of aromatic aldehyde, precipitate after filtration was loaded on column chromatography with 20percent ethyl acetate?hexane as an eluent system to furnish the product.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Bhosale, Shrikar M.; Naik, Nilesh H.; Kusurkar, Radhika S.; Synthetic Communications; vol. 43; 23; (2013); p. 3163 – 3169;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16588-02-6, name is 2-Chloro-5-nitrobenzonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. name: 2-Chloro-5-nitrobenzonitrile

3-Cyano-4-chloroaniline 2-Chloro-5-nitrobenzonitrile (25 g, 137 mmol) was dissolved in ethanol (275 mL). Stannous chloride dihydrate (154.5 g, 0.685 M) was added and the mixture stirred at 70 C. for 30 min. The mixture was then cooled to room temperature and poured into crushed ice. The mixture was made basic with solid sodium hydroxide. This mixture was extracted with ethyl acetate (3*100 mL). The extracts were combined, washed with brine, dried (MgSO4), concentrated and the residue dried under vacuum and recrystallized from ethanol to yield light brown needles (10.6 g, 51%).

The synthetic route of 16588-02-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Chapdelaine, Marc; Davenport, Timothy; Haeberlein, Markus; Horchler, Carey; McCauley, John; Pierson, Edward; Sohn, Daniel; US2004/110745; (2004); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Reference of 29509-06-6, A common heterocyclic compound, 29509-06-6, name is 4-Methyl-3-oxopentanenitrile, molecular formula is C6H9NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Hydroxylamine hydrochloride (10.3 g, 148 mmol) was slowly added to an ice cold solution of NaOH (25.9 g, 645 mmol) in water (73 mL) and the resulting solution was poured into a solution of crude 3-oxo-4-methylpentanenitrile while stirring. The resulting yellow solution was heated at 50 C for 2.5 hours to produce a less dense yellow oil. The warm reaction mixture was immediately extracted with CHCl3 (3 x 100 mL) without cooling. The combined organic layers were dried (MgSO4), and concentrated in vacuo. The resulting oily yellow solid was filtered through a pad of silica (10% acetone/90% CH2Cl2) to afford the desired isoxazole as a yellow solid (11.3 g, 70%): mp 63-65 C; TLC Rf (5% acetone/95% CH2Cl2) 0.19; 1H-NMR (DMSO-d6) d 1.12 (d, J=7.0 Hz, 6H), 2.72 (sept,J=7.0 Hz, 1H), 4.80 (s, 2H), 6.44 (s, 1H); FAB-MS m/z (rel abundance) 127 ((M+H)+; 67%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Bayer Pharmaceuticals Corp.; EP1047418; (2005); B1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Synthetic Route of 1080-74-6,Some common heterocyclic compound, 1080-74-6, name is 2-(3-Oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile, molecular formula is C12H6N2O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a degassed solution of intermediate 1 (0.13 g, 0.1 1 mmol) and 3- (dicyanomethylidene)indan-l -one (1 .5 g, 0.77 mmol) in chloroform (12 cm3) is added pyridine (0.6 cm3, 8 mmol). The mixture is then degassed with nitrogen for 30 minutes and then heated at 70 C for 15 hours. The reaction mixture allowed to cool to 23 C and the solvent removed in vacuo. The crude is purified by column chromatography (40-60 petrol :chloroform; 1 : 1 ) to give compound 75 (1 .1 g, 65%) as a dark blue crystalline solid. 1H NMR (400 MHz, CDCIs) 8.87 (2H, s), 8.69 (2H, d, J 7.6), 7.91 (2H, d, J 7.1 ), 7.68 – 7.79 (6H, m), 7.08 – 7.18 (16H, m), 2.60 (8H, t, J 7.7), 1 .62 (8H, q, J 7.1 Hz), 1 .21 – 1 .39 (40H, m), 0.88 (12H, t, J 6.5).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(3-Oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile, its application will become more common.

Reference:
Patent; MERCK PATENT GMBH; MORSE, Graham; NANSON, Lana; MITCHELL, William; KROMPIEC, Michal; D’LAVARI, Mansoor; PRON, Agnieszka; (327 pag.)WO2018/65350; (2018); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 51762-67-5 as follows. Recommanded Product: 3-Nitrophthalonitrile

3-nitrophthalonitrile (0.500 g, 2.888 mmol) was dissolved in anhydrous dimethylformamide (75 mL) under Ar and hydroxymethyl-EDOT (0.500 g, 2.903 mmol) was added. After stirring for 10 min, finely ground anhydrous K2CO3 (1.200 g, 8.682 mmol) was added in portions over 2 h with efficient stirring. The reaction mixture was stirred at room temperature for 120 h under Ar. Then the solution was poured into ice-water. The resulting white solid was collected by filtration and washed first with water and then with hexane. Yield 0.493 g (57%). Mp: 192 C. FT-IR: numax, cm-1 3116.56 (CH, aromatic), 2963.20 (CH, aliphatic), 2230.15 (C?N). 1H NMR (400 MHz, DMSO-d6, 298 K): delta, ppm 7.88-7.69 (3H, benzene -CH), 6.64 (2H, thiophene -CH), 4.63-4.13 (5H, -CH and -CH2). 13C NMR (400 MHz, CDCl3, 298 K): delta, ppm 160.38, 141.00, 140.83, 135.87, 126.21, 118.72, 115.71, 115.35, 113.48, 103.10, 100.16, 71.49, 68.00, 64.77. GC-MS: m/z 298 [M]+. C15H10N2O3S (298.04): calcd. C 60.39, H 3.38, N 9.39; found C 60.37, H 3.37, N 9.40.

According to the analysis of related databases, 51762-67-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Karada?, Sebahattin; Bozo?lu, Ceyda; Kasim ?ener; Koca, Atif; Dyes and Pigments; vol. 100; 1; (2014); p. 168 – 176;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 67515-59-7, name is 4-Fluoro-3-(trifluoromethyl)benzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 67515-59-7, HPLC of Formula: C8H3F4N

4-fluoro-3-(trifluoromethyl)benzonitrile (1 g; 5.29 mmol; 1 eq.) and (R)-(-)-2-methylpiperidine (3.1 rmL; 26.4 mmol; 5 eq.) in DMSO (10 mL) were heated at 1000C under nitrogen for 12h. The reaction mixture was then diluted in EtOAc, washed with water, NaHCO3 sat and NH4CI sat. The organic phase was dried over MgSO4, filtered and evaporated under vacuum to give a yellow oil, that was submitted to the next step without further purification. HPLC (Method A) Rt 5.65 min. LC/MS (Method B): 269.1 (M+H)+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Fluoro-3-(trifluoromethyl)benzonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK SERONO S.A.; MUZERELLE, Mathilde; QUATTROPANI, Anna; MONTAGNE, Cyril; DORBAIS, Jerome; WO2010/69949; (2010); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

328-87-0, name is 2-Chloro-5-trifluoromethylbenzonitrile, belongs to nitriles-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 2-Chloro-5-trifluoromethylbenzonitrile

EXAMPLE 7 Preparation of 2-Cyano-alpha,alpha,alpha-trifluoro-p-tolyl-3-ethoxy-4-nitrophenyl ether A solution of potassium hydroxide (2.6 g., 0.04 mole) 87.3% pure and 3-ethoxy-4-nitrophenol (7.3 g., 0.04 mole) in methanol (30 ml) is stripped to dryness under reduce pressure. A residue of potassium 3-ethoxy-4-nitrophenoxide is dissolved in sulfolane (200 g.) and 4-chloro-3-cyano-benzotrifluoride (8.2 g., 0.04 mole) is added. Gas-liquid chromotography shows the reaction to be complete after stirring at 110 C. for 41/2 hours and 135 C for 21/2 hours. The reaction mixture is cooled and poured into deionized water and the precipitate which forms is filtered off and air dried. Recrystallization from isopropanol yields 2-cyano-alpha,alpha,alpha-trifluoro-p-tolyl-3-ethoxy-4-nitrophenyl ether (7.4 g. 53%) m.p. 143-145 C.

The synthetic route of 328-87-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Rohm and Haas Company; US4063929; (1977); A;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts