Author: Jessica.F

Application of 64248-62-0,Some common heterocyclic compound, 64248-62-0, name is 3,4-Difluorobenzonitrile, molecular formula is C7H3F2N, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1: 3,4-Difluorobenzonitrile (30 g, 0 · 22 mol) was placed in a 500 mL autoclave, and an ammonia gas of 37 · 4 g (2.2 mol) was introduced. Then, the temperature was raised to 110 C for 24 hours, sampled, and the reaction was monitored by liquid chromatography to a normalized content of 0.5%. After cooling to room temperature, pressure was added, toluene (120 mL) was added, the temperature was raised to 60 C for 0.5 h, then the temperature was lowered to 0 C, filtered, and the filter cake was mixed with water (150 mL X 3 ), filtered, and filtered cake 40. (: Vacuum drying to give 2- fluoro-4-aminobenzonitrile 27.9 g (yield 95%; purity >99%, off-white solid, melting point 70-72 C). It is 3-fluoro-4-aminobenzonitrile.

The synthetic route of 64248-62-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Jinkai (Liaoning) Chemical Co., Ltd.; Yang Xiaoge; Wang Yongcan; Wang Xiuying; Jiang Zhipeng; Zhang Jinxin; Song Tongji; (13 pag.)CN109678741; (2019); A;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Synthetic Route of 4426-11-3, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4426-11-3, name is Cyclobutanecarbonitrile, This compound has unique chemical properties. The synthetic route is as follows.

LiHMDS (1M in toluene, 17.7 mL, 17.7 mmol, 3.1 eq) is added dropwise to a cold (-5 C.) solution of 4-bromo-2-fluoro-pyridine [Marsais, F. et al, Journal of Organic Chemistry, (1992), 57, 565-573] (1 g, 5.7 mmol) and cyclobutanecarbonitrile (1.39 g, 17.1 mmol, 3 eq) in toluene (20 mL). The reaction mixture is allowed to warm to rt, stirred for 5 h, quenched by addition of a saturated solution of NaHCO3 and filtered through a pad of celite. The filtrate is extracted with EtOAc. The organic phase is washed with a saturated solution of NaHCO3, dried (Na2SO4), filtered and concentrated. The residue is purified by silica gel column chromatography (Hex/EtOAc, 1:0?95:5) to afford 933 mg of the title compound as a yellow oil: ESI-MS: 237.0/239.0 [M+H]+; tR=4.27 min (System 1); TLC: Rf’0.30 (Hex/EtOAc, 9:1).

The chemical industry reduces the impact on the environment during synthesis Cyclobutanecarbonitrile. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Novartis AG; US2009/163469; (2009); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Synthetic Route of 138642-47-4, These common heterocyclic compound, 138642-47-4, name is 2-Bromo-5-methoxybenzonitrile, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a mixture of substituted alcohol 1 (1 mmol) and substituted nitrile 2 (1 mmol), T3P 50 wt% in ethyl acetate (50 mol%) was added and stirred at 90 C. After the reactant disappeared (monitored by TLC), the reaction mixture was cooled to room temperature, excess of water was added and extracted with ethyl acetate and combined organic layer was washed with brine, dried over Na2SO4 and concentrated under reduced pressure. The crude product was purified by recrystallization using DCM: pet ether (1:9) mixture to get pure compound 3.

The synthetic route of 138642-47-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Chaithra, Nagaraju; Mantelingu, Kempegowda; Rangappa, Kanchugarakoppal S.; Rangappa, Shobith; Sandhya, Nagarakere C.; Swarup, Hassan A.; Synthetic Communications; vol. 49; 16; (2019); p. 2106 – 2116;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 935-02-4, name is 3-Phenylpropiolonitrile, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C9H5N

4.4.1 (Z+E)-3-(3-Methyl-2-selenoxo-2,3-dihydro-1H-imidazol-1-yl)-3-phenyl-2-propenenitrile (4a) To a mixture of acetylene 2 (64.0 mg, 0.5 mmol) and Se (40.0 mg, 0.5 mmol) in MeCN (1 mL) was added 1-methylimidazole (1a; 41.0 mg, 0.5 mmol) in MeCN (1 mL). The mixture was stirred at 82 C for 5 h. After cooling to 20-25 C, the solvent was removed and column chromatography afforded selone (Z)-4a (46 mg, 39%) as a yellow microcrystalline powder, mp 208-209 C (ethanol). Initial imidazole 1a was recovered (7 mg, conversion was 83%). Initial Se was recovered (20 mg, conversion was 50%). Z:E-isomers ratio was 5:1 [(E)-isomer, 5%, data 1H NMR]. (Z)-Isomer: 1H NMR (400.13 MHz, CDCl3): delta=7.50-7.27 [m, 5H, Ho,m,p from C(6)-Ph], 7.07 (s, 1H, 4-H), 6.98 (s, 1H, 5-H), 6.12 (s, 1H, 7-H), 3.76 (s, 3H, N-CH3) ppm. 13C NMR (100.62 MHz, CDCl3): delta=159.2 (C-2), 154.9 (C-6), 132.4 [Ci from C(6)-Ph], 132.0 [Cp from C(6)-Ph], 129.3 [Cm from C(6)-Ph], 127.0 [Co from C(6)-Ph], 121.7 (C-4), 119.3 (C-5), 114.5 (CN), 97.7 (C-7), 37.5 (N-CH3) ppm. (E)-Isomer: 1H NMR (400.13 MHz, CDCl3): delta=7.50-7.45 [m, 5H, Ho,m,p from C(6)-Ph], 6.94 (s, 1H, 7-H), 6.90 (s, 1H, 4-H), 6.65 (s, 1H, 5-H), 3.73 (s, 3H, N-CH3) ppm. IR (KBr): 2222 (CN), 1622 (C=C), 1368 (C=Se) cm-1. Anal. Calcd for C13H11N3Se (288.21): C, 54.18; H, 3.85; N, 14.58; Se, 27.40. Found: C, 54.50; H, 3.99; N, 14.52; Se, 27.07.

According to the analysis of related databases, 935-02-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Belyaeva, Kseniya V.; Andriyankova, Ludmila V.; Nikitina, Lina P.; Mal’Kina, Anastasiya G.; Afonin, Andrei V.; Ushakov, Igor A.; Bagryanskaya, Irina Yu.; Trofimov, Boris A.; Tetrahedron; vol. 70; 5; (2014); p. 1091 – 1098;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3759-28-2, name is 2-(Cyanomethyl)benzonitrile, A new synthetic method of this compound is introduced below., Recommanded Product: 3759-28-2

Step B 4-Cyano-N-(1,1-dimethylethoxy)carbonyl-4-(2-cyanophenyl)piperidine A solution of bis(2-chloroethyl)-N-(1,1-dimethylethoxy)carbonyl amine (19 g, 78 mmol) and homophthalonitrile (8.6 g, 60 mmol) and cesium carbonate (79 g, 241 mmol) was stirred at 60 C. for 12 hours. The solution cooled to room temperature and diluted with 500 ml EtOAc and washed with saturated aqueous NaHSO4 and saturated aqueous NaCl. The solution was dried over Na2SO4, concentrated in vacuo, and purified by PCTLC (30% EtOAc in Hexane) to afforded 4-cyano-N-(1,1-dimethylethoxy)carbonyl-4-(2-cyanophenyl) piperidine as a yellow/orange oil. 1H NMR (CDCl3): delta7.81-7.79 (d, 2H), 7.67-7.65 (m, 2H), 7.51-7.47 (m, 1H), 4.31 (br s, 2H), 3.26 (br s, 2H), 2.33-2.20 (m, 4H), 1.48 (s, 9H).

The synthetic route of 3759-28-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Merck & Co., Inc.; US6319932; (2001); B1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Application of 13531-48-1, These common heterocyclic compound, 13531-48-1, name is Methyl 3-cyanobenzoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a round-bottom flask (25 mL) was added phenylhydrazine hydrochloride 1a (43 mg, 0.3 mmol), benzonitrile 2a (0.3 mL, 3 mmol), t-BuONO (53 muL, 0.45 mmol), I2 (38 mg, 0.15 mmol), the mixture was well stirred for 6 h at 25 oC (the whole process was closely monitored by TLC). Then the reaction mixture was purified by a flash silica gel column chromatography (eluent: Petroleum ether (PE)/Ethyl acetate (EA) = 10:1) to give N-phenylbenzamide 3a as a white solid (38 mg, 64%).

Statistics shows that Methyl 3-cyanobenzoate is playing an increasingly important role. we look forward to future research findings about 13531-48-1.

Reference:
Article; Zhang, Zhiguo; Li, Xiang; Li, Yinghua; Guo, Yan; Zhao, Xunan; Yan, Yan; Sun, Kai; Zhang, Guisheng; Tetrahedron; vol. 75; 26; (2019); p. 3628 – 3635;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 149793-69-1, name is 3-Fluoro-5-(trifluoromethyl)benzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 149793-69-1, Safety of 3-Fluoro-5-(trifluoromethyl)benzonitrile

Synthesis of Int rmediate (1)Molecu lar Weight: 189.1 Molecu lar Weight: 276.3[00506] In a 3-neck 100 mL round-bottomed flask, 2-(dimethylamino)ethanol (2.925, 1.2 eq.) was dissolved in THF (50 mL, 10 Vol), added NaH portion wise in reaction mixture at -25C. Stirred the reaction mixture at -25C for 1 hr. Added 3-fluoro-5-(trifluoromethyl)benzonitrile (5.0 g,1.0 eq) Portion wise in reaction mixture. Reaction mixture was stirred at this temp for 2 hrs and then at RT overnight. Reaction completion was monitored on TLC using ethyl acetate: hexane (3:7) mobile phase. Reaction mixture was quenched into the ice-water slurry (250 mL) and compound was extracted in the ethyl acetate (50 mL x 3). Organic layer was washed with brine solution (50 mL x 3) followed by drying using anhydrous sodium sulphate. Organic layer was concentrated under reduced pressure to afford 6.5 g of crude compound, Yield (89.18%). This crude material was directly used for next step without purification. Mass: 276.3.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Fluoro-5-(trifluoromethyl)benzonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; KARYOPHARM THERAPEUTICS, INC.; SHECHTER, Sharon; KAUFFMAN, Michael; SANDANYAKA, Vincent, P.; SHACHAM, Sharon; WO2011/109799; (2011); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 868-54-2, name is 2-Aminoprop-1-ene-1,1,3-tricarbonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 868-54-2

General procedure: Heterocyclic ketene aminals (1 mmol), aryl aldehydes (1.2 mmol), malononitriledimer (1.5 mmol), acetic acid (1 mmol), piperidine (1 mmol) and ethanol (10 mL)were stirred at refluxing for 1 h. After completion of the reaction (confirmed by TLC),the reaction mixture was filtered to afford the crude product, which was furtherwashed with 95% ethanol to give pure product 4.

The synthetic route of 868-54-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sun, Feilong; Zhu, Fengjuan; Shao, Xusheng; Li, Zhong; Synlett; vol. 26; 16; (2015); p. 2306 – 2312;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1885-38-7, name is (E)-Cinnamonitrile, A new synthetic method of this compound is introduced below., Computed Properties of C9H7N

General procedure: Cu(NO3)2·3H2O (0.10 mmol), the appropriate nitrile 1 (1.0 mmol), NaN3(2.0 mmol) and DMF (1 mL) were added to a 50 mL round-bottomed flask equipped with a magnetic stirrer. The reaction mixture was stirred in an oil bath at 120 C for 16 h. After cooling to room temperature, the reaction was acidified HCl (3 M, pH 1.0). Ethyl acetate (~30 mL) wasadded, and stirring was continued until no solid was present. The organic layer was separated, and the aqueous layer was extracted with ethylacetate twice. The combined organic layers were washed with saturatedbrine, and concentrated in vacuo. The residue was purified by columnchromatography (silica gel, EtOAc-PE) to afford the product 2.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Tao, Chuanzhou; Wang, Bin; Sun, Lei; Yi, Jiuyin; Shi, Dahua; Wang, Jian; Liu, Weiwei; Journal of Chemical Research; vol. 41; 1; (2017); p. 25 – 29;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Application of 4640-67-9, A common heterocyclic compound, 4640-67-9, name is 3-(4-Fluorophenyl)-3-oxopropanenitrile, molecular formula is C9H6FNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a 0.5-2.0ml vial with 1 mmol ketone (1 eq) issolved in 2-pentanol (1.66 M) was added 1.1 eq of aromatic aldehyde and catalytic piperidine (0.08 eq), stirring vigorously. After heating under muWave for 15min at 120 C, the reaction was cooled to r.t. and precipitate was vacuum filtered and washed with minimal, cold hexanes. After drying under vacuum, solid was analyzed via NMR, IR, and mp.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Deshpande, Shyam J.; Leger, Paul R.; Sieck, Stephen R.; Tetrahedron Letters; vol. 53; 14; (2012); p. 1772 – 1775;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts