Category: nitriles-buliding-blocks

Adding a certain compound to certain chemical reactions, such as: 1558-81-2, name is Ethyl 1-Cyano-1-cyclopropanecarboxylate, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1558-81-2, COA of Formula: C7H9NO2

To a mixture of ethyl 1-cyanocyclopropanecarboxylate (35.9mmol, 5g), dimethoxyethane (10OmL) and methanol (1OmL) was added sodium borohydride (287mmol, 10.87g) slowly and the mixture stirred at room temperature for 18 hours. The solution was diluted with saturated sodium hydrogen carbonate slowly and then extracted with 10% methanol / dichloromethane (x3). The organic layers were combined, dried over sodium sulphate and concentrated under vacuum to give the intermediate 1-(hydroxymethyl)cyclopropanecarbonitrile (2.36g). 1 H NMR (CDCI3, 400 MHz): delta 0.99 (2H, m), 1.28 (2H, m), 2.5 (1 H, br s), 3.62 (2H, s)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Ethyl 1-Cyano-1-cyclopropanecarboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; N.V. ORGANON; WO2009/24550; (2009); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Electric Literature of 170230-29-2, A common heterocyclic compound, 170230-29-2, name is 4-Bromo-3-ethylbenzonitrile, molecular formula is C9H8BrN, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Description 27; 2-ethyl-2′-fluoro-4-biphenylcarboxylic acid (D27); A mixture of 4-bromo-3-ethylbenzonitrile (D25) (651 mg, 3.10 mmol), 2- fluorophenylboronic acid (867 mg, 6.20 mmol), palladiumtetrakistriphenylphosphine (359 mg, 0.31 mmol) and potassium carbonate (1.29 g, 9.30 mmol) in dimethylformamide (10 ml.) was heated to 170 0C in the microwave for 30 minutes. The mixture was allowed to stand at room temperature over a weekend before it was poured into a mixture of ice and saturated aqueous ammonium chloride. The mixture was extracted with ethyl acetate (3 x 20 ml.) and the combined organics washed with brine, dried (phase separator) and evaporated. The residue was purified by silica chromatography, eluting 0-5 % EtOAc in hexane to give a colourless oil (655 mg). This material was added to ethanol (26 ml.) and water (6 ml.) followed by potassium hydroxide (1.62 g, 28.9 mmol) and the mixture heated to 90 0C for 17 h. The solvent was evaporated and the residue partitioned between ethyl acetate and 2M HCI. The organic layer was washed with further HCI before it was dried (phase separator) and concentrated in vacuo to give the title compound as a white solid (648 mg, 2.66 mmol). MS (ES”): Ci5H13FO2 requires 244; found 243 (M-H+).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; GLAXO GROUP LIMITED; WO2008/74820; (2008); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

These common heterocyclic compound, 64113-85-5, name is 4-Methyl-[1,1′-biphenyl]-2-carbonitrile, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 64113-85-5

General procedure: The heterocyclic derivative (0.99 mmol) and 5 mL THF is cooled to -78 oC, n-BuLi solution ( 0.5, mL, 1.2 eq) is added, the mixture is stirred 1 hr, after which 2-cyano-4-methyhlbiphenyl (192 mg, 0.99 mmol, dissolved in 5 mL THF) is added dropwise, The solution is then stirred 1 hr at -78 oC, then allowed to warm to room temperature and stirred for 6 hr. After this, 10 mL of 6M HCl is added and the mixture is stirred overnight. The solution is then basified with 10M NaOH and the products are partitioned between ether and water. The aqueous layer is further extracted (2x with ether) and the combined extracts are washed with brine, dried over anhydrous sodium sulfate, and filtered. The solvent is then removed under reduced pressure and the crude mixture is purified by column chromatography (1:1, hexanes: ethyl acetate).

The synthetic route of 4-Methyl-[1,1′-biphenyl]-2-carbonitrile has been constantly updated, and we look forward to future research findings.

Reference:
Article; Stentzel, Michael R.; Klumpp, Douglas A.; Tetrahedron Letters; vol. 60; 25; (2019); p. 1675 – 1677;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Reference of 14447-18-8, The chemical industry reduces the impact on the environment during synthesis 14447-18-8, name is Benzyl cyanoacetate, I believe this compound will play a more active role in future production and life.

General procedure: A 100-mL round-bottom flask equipped with a stir bar is charged with dimethyl malonate (2.0 g, 15.0 mmol), crotonaldehyde (1.3 mL, 15.0 mmol), piperidine (0.2 mL, 3.0 mmol), benzoic acid (0.4 g, 3.0 mmol) and toluene (50 mL). The reaction mixture is heated at reflux using a Dean-Stark apparatus for 2 h. The toluene solution is washed with water, dried over Na2SO4 and concentrated in vacuo. The crude product is purified by silica gel column chromatography eluting with hexanes/ethyl acetate (20/1) to afford 1a (1.7 g, 60% yield) as a red liquid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Benzyl cyanoacetate, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Zhang, Wei; Ghiviriga, Ion; Grenning, Alexander J.; Tetrahedron; vol. 73; 29; (2017); p. 4076 – 4083;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 21423-84-7 as follows. COA of Formula: C8H6ClN

To a solution of 2-chloro-4-methylbenzonitrile (1 .06 g, 7 mmol) and /V-bromosuccinimide (1 .37 g, 7.7 mmol) in acetonitrile (70 ml_) was added 2,2-azob/s(2-methylpropionitrile (0.230 g, 1 .4 mmol) under argon. The mixture was stirred at 80 C for 20 h. The reaction mixture was filtered and washed with ethyl acetate (80 ml_). The filtrate was concentrated, and the resulting crude material was purified by column chromatography (silica gel, petroleum ether/ethyl acetate = 10/1 ) to give 4-(bromomethyl)-2-chlorobenzonitrile as a light-yellow solid (0.661 g, 2.87 mmol, 41 %). 1 H NMR (400 MHz, Chloroform-d) d 7.67-7.69 (m, 1 H), 7.57-7.58 (m, 1 H), 7.41 (dd, J/ = 1 .5 Hz, J2= 8.0 Hz, 1 H), 4.454 (s, 2H).

According to the analysis of related databases, 21423-84-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; YUMANITY THERAPEUTICS, INC.; LE BOURDONNEC, Bertrand; LUCAS, Matthew; OZBOYA, Kerem; PANDYA, Bhaumik; TARDIFF, Daniel; TIVITMAHAISOON, Parcharee; WRONA, Iwona; (475 pag.)WO2019/183587; (2019); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Synthetic Route of 868-54-2,Some common heterocyclic compound, 868-54-2, name is 2-Aminoprop-1-ene-1,1,3-tricarbonitrile, molecular formula is C6H4N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Heterocyclic ketene aminals (1 mmol), aryl aldehydes (1.2 mmol), malononitriledimer (1.5 mmol), acetic acid (1 mmol), piperidine (1 mmol) and ethanol (10 mL)were stirred at refluxing for 1 h. After completion of the reaction (confirmed by TLC),the reaction mixture was filtered to afford the crude product, which was furtherwashed with 95% ethanol to give pure product 4.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Aminoprop-1-ene-1,1,3-tricarbonitrile, its application will become more common.

Reference:
Article; Sun, Feilong; Zhu, Fengjuan; Shao, Xusheng; Li, Zhong; Synlett; vol. 26; 16; (2015); p. 2306 – 2312;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 654-70-6, name is 4-Cyano-3-trifluoromethylaniline, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 654-70-6, Application In Synthesis of 4-Cyano-3-trifluoromethylaniline

[003 19j Thionyl chloride (46.02 g, 0.39 mol) was added dropwise to a cooled solution (less than 4C) of (R)-3-bromo-2-hydroxy-2-methylpropanoic acid (51.13 g, 0.28 mol) in 300 mL of THF under an argon atmosphere. The resulting mixture was stirred for 3 h under the same condition. To this was added Et3N (39.14 g, 0.39 mol) and stirred for 20 mm under the same condition. After 20mm, 5-amino-2-cyanobenzotrifluoride (40.0 g, 0.21 mol), 400 mL of THF were added and then the mixture was allowed to stir overnight at RT. The solvent was removed under reduced pressure to give a solid which was treated with 300 mL of H20, extracted with EtOAc (2 x400 mL). The combined organic extracts were washed with saturated NaHCO3 solution (2 x 300 mL) and brine (300 mL). The organic layer was dried over MgSO4 and concentrated under reduced pressure togive a solid which was purified from column chromatography using CH2CWEtOAc (80:20) to give a solid. This solid was recrystallized from CH2CWhexane to give 55.8 g (73.9%) of (2R)-3-bromo- N-[4-cyano-3 -(trifluoromethyl)phenylj -2-hydroxy-2-methylpropanamide as a light-yellow solid. Mp 134.0-136.5C;[00320j ?H NMR (CDC13fFMS) oe 1.66 (s, 3H, CH3), 3.11 (s, 1H, OH), 3.63 (d, J= 10.8 Hz, 1H,CH2), 4.05 (d, J= 10.8 Hz, 1H, CH2), 7.85 (d, J= 8.4 Hz, 1H, Ar]), 7.99 (dd, J=2.1, 8.4 Hz, 1H,ArH), 8.12 (d, J = 2.1 Hz, 1H, ArH), 9.04 (bs, 1H, NH). MS (ESI) 349.0 [M – Hj M.p.: 124- 126C.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Cyano-3-trifluoromethylaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GTX, INC.; UNIVERSITY OF TENNESSEE RESEARCH FOUNDATION; NARAYANAN, Ramesh; MILLER, Duane D.; PONNUSAMY, Thamarai; HWANG, Dong-Jin; DUKE, Charles B.; COSS, Christopher C.; JONES, Amanda; DALTON, James T.; (159 pag.)WO2016/172330; (2016); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Reference of 876-31-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 876-31-3, name is 4-(Cyanomethyl)benzonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

4-(1-Cyanocyclopentyl)benzonitrile [S11]. In a flamed dried 50 mL flask, 710.8 mg (5.0 mmol) of 2-(4-cyanophenyl)acetonitrile was dissolved in 7.5 mL anhydrous DMF. 316.0 mg (95% purity, 12.5 mmol, 2.5 equiv.) of NaH was added in portions at 0 C. and the reaction was allowed to stir for 1 hour at 0 C. 1.0797 g (0.59 mL, 5.0 mmol, 1.0 equiv.) of 1,4-dibromobutane was added dropwise at 0 C. and the reaction was allowed to stir overnight at room temperature. The reaction was quenched carefully with -10 mL water and extracted with 30 mL EtOAc three times. The combined organic layer was washed with 50 mL brine, dried with MgSO4, filtered, and concentrated. Flash column chromatography on silica (50 mm fritted glass column, 300 mL SiO2) using 5% EtOAc/hexanes?10% EtOAc/hexanes as eluent gave 880.1 mg (4.48 mmol) of pure product as a colorless oil (90% yield). 1H-NMR (500 MHz, CDCl3) delta 7.69-7.67 (m, 2H), 7.59-7.57 (m, 2H), 2.52-2.48 (m, 2H), 2.09-1.94 (m, 6H). 13C-NMR (126 MHz, CDCl3) delta 145.2, 132.8, 127.0, 123.3, 118.3, 112.0, 48.0, 40.7, 24.5. HRMS (EI+) m/z calculated for C13H12N2 [M]+: 196.1000, found 196.1004.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-(Cyanomethyl)benzonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; The Board of Trustees of the University of Illinois; WHITE, M. Christina; ZHAO, Jinpeng; (94 pag.)US2020/87331; (2020); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 15666-97-4, name is Octyl 2-cyanoacetate, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 15666-97-4, Recommanded Product: Octyl 2-cyanoacetate

General procedure: Aldehyde 5a-d (1.0equiv.), cyanoalkyl acetate (3.0equiv.) and a few drops of triethylamine were dissolved in chloroform (30mL) under a nitrogen atmosphere and heated to reflux overnight. After the completion of the reaction, water was added and the product was extracted with dichloromethane, washed with brine and dried over anhydrous MgSO4. The crude product was purified by column chromatography with dichloromethane/Hexanes as eluent. It was then further purified by trituration with acetone to yield the desired compounds 1-4.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Octyl 2-cyanoacetate, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Priyanka, Pragya; Vegiraju, Sureshraju; Lin, Jhe-Yi; Ni, Jen-Shyang; Huang, Hsun-Ying; Dwi Agustin, Rachmawati; Yau, Shueh Lin; Lin, Tzu-Chau; Chen, Ming-Chou; Dyes and Pigments; vol. 133; (2016); p. 65 – 72;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Electric Literature of 939-80-0,Some common heterocyclic compound, 939-80-0, name is 4-Chloro-3-nitrobenzonitrile, molecular formula is C7H3ClN2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4-Chloro-3-nitrobenzonitrile (331 mg) and cesium carbonate (700 mg) were added to a solution of compound (1a) (500 mg) in acetonitrile (5.5 mL), and the mixture was stirred under heating at 70 C. for 4 hours. After completion of the reaction, the reaction solution was allowed to standing still for cooling and partitioned between ethyl acetate and water. The organic layer was washed with saturated brine and dried by the addition of anhydrous sodium sulfate. After removal of the solvent by evaporation, the residue was subjected to slurry washing (acetonitrile/methanol), thereby to obtain compound (10a) (470 mg, yield 64%) as a milky white solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Chloro-3-nitrobenzonitrile, its application will become more common.

Reference:
Patent; TAIHO PHARMACEUTICAL CO., LTD.; Kitade, Makoto; Ohkubo, Shuichi; Yoshimura, Chihoko; US2013/289072; (2013); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts