Category: nitriles-buliding-blocks

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1885-38-7, name is (E)-Cinnamonitrile, A new synthetic method of this compound is introduced below., Computed Properties of C9H7N

General procedure: Cu(NO3)2·3H2O (0.10 mmol), the appropriate nitrile 1 (1.0 mmol), NaN3(2.0 mmol) and DMF (1 mL) were added to a 50 mL round-bottomed flask equipped with a magnetic stirrer. The reaction mixture was stirred in an oil bath at 120 C for 16 h. After cooling to room temperature, the reaction was acidified HCl (3 M, pH 1.0). Ethyl acetate (~30 mL) wasadded, and stirring was continued until no solid was present. The organic layer was separated, and the aqueous layer was extracted with ethylacetate twice. The combined organic layers were washed with saturatedbrine, and concentrated in vacuo. The residue was purified by columnchromatography (silica gel, EtOAc-PE) to afford the product 2.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Tao, Chuanzhou; Wang, Bin; Sun, Lei; Yi, Jiuyin; Shi, Dahua; Wang, Jian; Liu, Weiwei; Journal of Chemical Research; vol. 41; 1; (2017); p. 25 – 29;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 868-54-2, name is 2-Aminoprop-1-ene-1,1,3-tricarbonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 868-54-2

General procedure: Heterocyclic ketene aminals (1 mmol), aryl aldehydes (1.2 mmol), malononitriledimer (1.5 mmol), acetic acid (1 mmol), piperidine (1 mmol) and ethanol (10 mL)were stirred at refluxing for 1 h. After completion of the reaction (confirmed by TLC),the reaction mixture was filtered to afford the crude product, which was furtherwashed with 95% ethanol to give pure product 4.

The synthetic route of 868-54-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sun, Feilong; Zhu, Fengjuan; Shao, Xusheng; Li, Zhong; Synlett; vol. 26; 16; (2015); p. 2306 – 2312;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 149793-69-1, name is 3-Fluoro-5-(trifluoromethyl)benzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 149793-69-1, Safety of 3-Fluoro-5-(trifluoromethyl)benzonitrile

Synthesis of Int rmediate (1)Molecu lar Weight: 189.1 Molecu lar Weight: 276.3[00506] In a 3-neck 100 mL round-bottomed flask, 2-(dimethylamino)ethanol (2.925, 1.2 eq.) was dissolved in THF (50 mL, 10 Vol), added NaH portion wise in reaction mixture at -25C. Stirred the reaction mixture at -25C for 1 hr. Added 3-fluoro-5-(trifluoromethyl)benzonitrile (5.0 g,1.0 eq) Portion wise in reaction mixture. Reaction mixture was stirred at this temp for 2 hrs and then at RT overnight. Reaction completion was monitored on TLC using ethyl acetate: hexane (3:7) mobile phase. Reaction mixture was quenched into the ice-water slurry (250 mL) and compound was extracted in the ethyl acetate (50 mL x 3). Organic layer was washed with brine solution (50 mL x 3) followed by drying using anhydrous sodium sulphate. Organic layer was concentrated under reduced pressure to afford 6.5 g of crude compound, Yield (89.18%). This crude material was directly used for next step without purification. Mass: 276.3.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Fluoro-5-(trifluoromethyl)benzonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; KARYOPHARM THERAPEUTICS, INC.; SHECHTER, Sharon; KAUFFMAN, Michael; SANDANYAKA, Vincent, P.; SHACHAM, Sharon; WO2011/109799; (2011); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Application of 13531-48-1, These common heterocyclic compound, 13531-48-1, name is Methyl 3-cyanobenzoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a round-bottom flask (25 mL) was added phenylhydrazine hydrochloride 1a (43 mg, 0.3 mmol), benzonitrile 2a (0.3 mL, 3 mmol), t-BuONO (53 muL, 0.45 mmol), I2 (38 mg, 0.15 mmol), the mixture was well stirred for 6 h at 25 oC (the whole process was closely monitored by TLC). Then the reaction mixture was purified by a flash silica gel column chromatography (eluent: Petroleum ether (PE)/Ethyl acetate (EA) = 10:1) to give N-phenylbenzamide 3a as a white solid (38 mg, 64%).

Statistics shows that Methyl 3-cyanobenzoate is playing an increasingly important role. we look forward to future research findings about 13531-48-1.

Reference:
Article; Zhang, Zhiguo; Li, Xiang; Li, Yinghua; Guo, Yan; Zhao, Xunan; Yan, Yan; Sun, Kai; Zhang, Guisheng; Tetrahedron; vol. 75; 26; (2019); p. 3628 – 3635;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 17626-40-3, name is 3,4-Diaminobenzonitrile, A new synthetic method of this compound is introduced below., Formula: C7H7N3

3,4-diaminobenzonitrile (42, 2.5g; 18.75mmol; 1.0 equiv) was dissolved in 5M 55 aqueous HCl (110mL). The mixture was heated at 105C to reflux for 12h. After stopping the reaction, the mixture was cooled to room temperature, basified with aqueous ammonia and stored overnight. The generated solid 56 product was collected by filtration and washed with ice water. The products could be used without further purification. Yield: 2.5g (94.0%). 1H NMR (300MHz, DMSO) delta 12.47 (s, 1H), 8.34 (s, 1H), 8.03 (s, 1H), 7.62 (d, J=4.17Hz, 1H), 7.45 (d, J=8.34Hz, 1H). MS m/z: 144.2 [M+ H] +.

The synthetic route of 17626-40-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Xu, Li-Li; Wu, Yu-Feng; Wang, Lei; Li, Cui-Cui; Li, Li; Di, Bin; You, Qi-Dong; Jiang, Zheng-Yu; European Journal of Medicinal Chemistry; vol. 157; (2018); p. 1376 – 1394;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 403-54-3, name is 3-Fluorobenzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 403-54-3, Product Details of 403-54-3

a. 3-Cyano-4-nitrofluorobenzene m-Fluorobenzonitrile (96.8 g., 0.8 mole) is added in two and one-half hours to a mixture of concentrated sulfuric acid (600 ml.) and potassium nitrate (80.9 g., 0.8 mole) at 3-6 C., then allowed to warm to 25 C. The mixture is poured over cracked ice (3000 ml.), extracted with chloroform (5*250 ml.), dried and the solvent removed. The residue is extracted with pentane and dried to give 3-cyano-4-nitrofluorobenzene (115 g., 86.5%) m.p. 102-104 C.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Fluorobenzonitrile, and friends who are interested can also refer to it.

Reference:
Patent; Rohm and Haas Company; US31455; (1983); E1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Electric Literature of 10406-25-4, A common heterocyclic compound, 10406-25-4, name is 4-(Aminomethyl)benzonitrile, molecular formula is C8H8N2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a round-bottom flask equipped with a stir bar was added 17a-b (1.0 eq), Boc2O (1.1 eq), CH2Cl2 (10mL/mmol), and triethylamine (1.5 eq). The reaction mixture was stirred at room temperature overnight. The reaction was concentrated in vacuo and partitioned between ethyl ether and 1M HCl. The organic layer were separated, washed with saturated NaHCO3 and brine, dried over MgSO4, and concentrated in vacuo to give a white crystalline solid. 4.2.4.2 128 tert-Butyl (4-cyanobenzyl)carbamate (18a) Yield: 93%. MP: 114-116C. 1H NMR (400MHz, CDCl3) delta 7.62 (d, J=7.9Hz, 2H, -ArH), 7.39 (d, J=8.5Hz, 2H, -ArH), 4.96 (s, 1H, -NH-), 4.37 (d, J=5.9Hz, 2H, -CH2-), 1.46 (s, 9H, -CH3)

The synthetic route of 10406-25-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Luo, Zonghua; Rosenberg, Adam J.; Liu, Hui; Han, Junbin; Tu, Zhude; European Journal of Medicinal Chemistry; vol. 150; (2018); p. 796 – 808;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 98730-77-9 as follows. Recommanded Product: 98730-77-9

Step 2. Preparation of 1-((1,3-dioxoisoindolin-2 yl)methyl)cyclopropanecarbonitrile A solution of 1-(hydroxymethyl)-cyclopropanecarbonitrile (5.52 g, 56.8 mmol), phthalimide (9.20 g, 62.5 mmol), and triphenylphosphine (16.4 g, 62.5 mmol) in THF (550 mL) was treated with DEAD (9.90 mL, 62.5 mmol) and stirred at room temperature for 17 hours. The reaction mixture was then concentrated and the resulting solids were triturated in diethyl ether (150 mL), and collected by filtration. Purification by flash chromatography (SiO2, 0-20% EtOAc in DCM) afforded 1-((1,3-dioxoisoindolin-2-yl)methyl)-cyclopropanecarbonitrile (8.8 g, 38.8 mmol, 68%) as a white solid: LCMS(m/z) 227.0 (MH+), tR=0.66 minute; 1H NMR (300 MHz, CDCl3) delta 7.90 (dd, J=5.4, 3.1 Hz, 2H), 7.77 (dd, J=5.4, 3.1 Hz, 2H), 3.81 (s, 2H), 1.30-1.44 (m, 2H), 1.28 (d, J=3.8 Hz, 2H).

According to the analysis of related databases, 98730-77-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Costales, Abran Q.; Huang, Shenlin; Jin, Jeff (Xianming); Liu, Zuosheng; Pecchi, Sabina; Poon, Daniel; Tellew, John; US2011/52578; (2011); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Synthetic Route of 5332-06-9, The chemical industry reduces the impact on the environment during synthesis 5332-06-9, name is 4-Bromobutanenitrile, I believe this compound will play a more active role in future production and life.

Reference Example 1 4-(p-tolylamino)butanenitrile p-Toluidine (10.407 g, 97.116 mmol) was dissolved in anhydrous acetonitrile and, after adding potassium carbonate (49.9 g, 361.272 mmol), stirred at room temperature for 10 minutes. After slowly adding 4-bromobutyronitrile (10.1 mL, 101.972 mmol) to the resultant reaction mixture, reaction was carried out at 100 C. for 2 days. The mixture was cooled to room temperature and the produced solid was removed by filtering. The filtrate was concentrated under reduced pressure. A target compound (13.23 g, 78.2%) was yielded. A target compound was used in the next step without further purification. 1H NMR (CDCl3, 300 MHz) delta 7.04 (d, J=8.0 Hz, 2H), 6.57 (d, J=8.3 Hz, 2H), 3.62 (s, 1H, NH), 3.29 (q, J=6.3 Hz, 2H), 2.47 (t, J=7.0 Hz, 2H), 2.28 (s, 3H), 1.96 (t, J=6.8 Hz, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Bromobutanenitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Korea Institute of Science and Technology; US2011/319619; (2011); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 53312-81-5, name is 5-Amino-2-fluorobenzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 53312-81-5, SDS of cas: 53312-81-5

To a solution of 5-amino-2-fluorobenzonitrile (3.75 g) and Et3N (4.22 mL) in CH2Cl2 (100 mL) was added ethyloxalyl chloride (3.08 mL) in a dropwise fashion over 10 minutes. The reaction was stirred at RT under N2 for 1.5 h. The reaction mixture was washed with water (2×50 mL) and brine (1×50 mL), filtered through phase separatory paper and evaporated. The residue was dissolved in 20 mL of CH2Cl2 and 100 mL of hexane was added. The solution was allowed to stand at RT for the weekend. The precipitate was filtered, rinsed with hexane, and dried under vacuum to give 5.43 g of 1-(3-cyano-4-fluorophenyl)-oxoacetic acid ethyl ester. 1H NMR (CDCl3) delta1.44 (t, 3H, J=7.2 Hz, OCH2CH3), 4.44 (q, 2H, J=7.0 Hz, OCH2CH3), 7.26 (t, 1H, J=3.8 Hz, aromatic H), 7.82 (m, 1H, aromatic H), 8.04 (m, 1H, aromatic H), 8.97 (bs, 1H, NH). DCI mass spectrum z (rel. intensity) 237.1 (M+H, 6.6), 254.0 (M+Na, 100).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Amino-2-fluorobenzonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; DuPont Pharmaceuticals Company; US6339099; (2002); B1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts