Category: nitriles-buliding-blocks

Adding a certain compound to certain chemical reactions, such as: 4592-94-3, name is 3-(4-Bromophenyl)-3-oxopropanenitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4592-94-3, Quality Control of 3-(4-Bromophenyl)-3-oxopropanenitrile

General procedure: A mixture of 1,2-bis(bromomethyl)benzene (1.0 mmol), alpha-cyanoacetophenone (1.0 mmol) and Cs2CO3 (3.0 mmol) in DMSO (5 mL) was stirred at 80 C for 4 h till almost full conversion of the substrates by TLC analysis. The resulting mixture was dropped into 100 mL 1 M HCl (aq) and extracted with EtOAc three times (3×50 mL). The organic extract was dried with Na2SO4, filtered and concentrated. The crude product was purified by column chromatography on silica gel (eluent: petroleum ether/EtOAc=50/1) to afford the product 3aa as a white solid.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Wang, Jungang; Xiang, Jiachen; Wang, Miao; Guan, Jie; Wu, Anxin; Tetrahedron; vol. 70; 7; (2014); p. 1412 – 1417;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Application of 3441-01-8,Some common heterocyclic compound, 3441-01-8, name is 3-Cyanobenzamide, molecular formula is C8H6N2O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The precipitated crystals were collected through filtration, washed with water, and dried, to thereby obtain 4.78 g of m-cyanobenzoic acid (yield 94percent, based on m-cyanobenzamide). The m-cyanobenzoic acid obtained had a purity of 98percent.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3-Cyanobenzamide, its application will become more common.

Reference:
Patent; Showa Denko Kabushiki Kaisha; US6433211; (2002); B1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

2042-37-7, name is 2-Bromobenzonitrile, belongs to nitriles-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Computed Properties of C7H4BrN

Example 2 2M Sodium carbonate solution (200 ml) was added to a stirred mixture of 4-methylphenylboronic acid (30 g), 2-bromobenzonitrile (36.4 g), palladium (II) chloride (0.4 g), methanol (200 ml) and toluene (200 ml) at 5C. The temperature rose to approximately 20C and a solid precipitated. The reaction mixture was then heated at reflux for 2 hours. The reaction mixture was allowed to cool and water (100 ml) was added, followed by diatomaceous earth (5 g). The mixture was stirred for 15 minutes, then filtered through diatomaceous earth. The organic phase of the filtrate was separated and washed with 2M sodium carbonate solution and then water. The organic phase was then filtered and the filtrate evaporated. The resultant solid was recrystallized from petroleum ether (b.p. 110-120C) to give 4–methylbiphenyl-2-carbonitrile (in 80% yield) identical to that obtained in Example 1.

The synthetic route of 2042-37-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ZENECA LIMITED; EP470795; (1992); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 114897-91-5,Some common heterocyclic compound, 114897-91-5, name is 2-(4-Bromo-2-fluorophenyl)acetonitrile, molecular formula is C8H5BrFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of Mel (3.2 mL, 49.3 mmol) in anhydrous DMF (82 mL) at 0 C. was added NaH (60%, 2.0 g), followed by (4-bromo-2-fluorophenyl)acetonitrile (3.5 g, 16.4 mmol). The mixture was slowly warmed up to room temperature and stirred for 3 hours. The reaction was quenched by the addition of saturated NH4Cl and extracted with EtOAc (3×150 mL). The combined organic extracts were washed with brine, dried with Na2SO4 and evaporated to dryness. The mixture was purified by flash column chromatography (0-20% EtOAc in hexanes) to give the product (3.0 g, 77% yield). 1H NMR (300 MHz, CDCl3) delta: 1.78 (s, 6H), 7.26-7.42 (m, 3H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(4-Bromo-2-fluorophenyl)acetonitrile, its application will become more common.

Reference:
Patent; Agouron Pharmaceuticals, Inc.; US2005/176701; (2005); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 145689-34-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 145689-34-5 name is 2-(2,3-Difluorophenyl)acetonitrile, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

EXAMPLE 65; 2-[1-(2,3-Difluoro-phenyl)-ethyl]-4,5-dihydro-1H-imidazole; a) rac-2-(2,3-Difluoro-phenyl)-propionitrile; A solution of 1.586 g (16 mmol) diisopropylamine in 25 ml tetrahydrofuran was cooled with sodium chloride/ice to -10 C. A solution of 9 ml (14 mmol) 1.6 M butyl lithium in hexanes was added drop-wise. After stirring for 10 min the resulting LDA solution was cooled to -78 C. and a solution of 2.00 g (13 mmol) 2,3-difluorophenyl-acetonitrile in 5 ml tetrahydrofuran slowly added. The reaction mixture was stirred at -78 C. for 40 min, then 2.22 g (16 mmol) methyl iodide were added and the cooling bath was removed after 5 min. The mixture was stirred for 2.5 h at room temperature, and then aqueous ammonium chloride solution was added. The mixture was extracted twice with ethyl acetate. The combined organic layers were dried over MgSO4, filtered and evaporated. The residue was purified using column chromatography (SiO2, heptanes/ethyl acetate 9:1) to yield 1.12 g of rac-2-(2,3-difluoro-phenyl)-propionitrile as a light yellow liquid; MS (EI): 167.1 (M+·), 152.1 (((M-CH3)+·), 100%).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-(2,3-Difluorophenyl)acetonitrile, and friends who are interested can also refer to it.

Reference:
Patent; Galley, Guido; Zbinden, Katrin Groebke; Hoener, Marius; Kolczewski, Sabine; Norcross, Roger; Stalder, Henri; US2007/197621; (2007); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Electric Literature of 77326-36-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 77326-36-4, name is 2-Amino-6-fluorobenzonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Example 2: Methyl- (2-cyano-3-methoxy-phenyl) sulfonamide; 2.1 : 2-Amino-6-methoxy-benzonitrile A solution of 70 g (0.5 mol) of 2-amino-6-fluoro-benzonitrile (prepared, e. g. according to US 4,504, 660) in 250 ml of N, N-dimethylformamide was initially charged and a solu- tion of 30.6 g (0.55 mol) sodium methoxide in 70 ml of methanol was added dropwise at room temperature while stirring. The mixture was then refluxed for 5 hours under stirring. The completion of the reaction was monitored by TLC. Additional 25 g of so- dium methoxide in 35 ml methanol were added and the reaction mixture was refluxed for additional 4 hours while stirring. The reaction mixture was concentrated under re- duced pressure, the resulting residue was triturated with water, sucked off and the ob- tained solids were dissolved in ethyl acetate. The resulting solution was concentrated in vacuo. The obtained residue was triturated with petroleum ether and sucked off to afford 48 g (63% of theory) of a brownish solid having a melting point of 143-146C.

The synthetic route of 2-Amino-6-fluorobenzonitrile has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BASF AKTIENGESELLSCHAFT; WO2005/35486; (2005); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Reference of 40497-11-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 40497-11-8 as follows.

0.01 mol of ethyl 2,3-dicyanopropionate was added to a three-necked flask. The prepared diazonium salt solution was dropped into the flask. The reaction was complete for 2 h. Adding aqueous ammonia, adjust the pH to 9-10. Reaction at room temperature for 2h. After completion of the reaction, the reaction mixture was extracted with 40 mL of dichloromethane. The organic layer was washed with water (2 x 30 mL), washed with saturated sodium chloride solution (1 x 40 mL), and dried over anhydrous magnesium sulfate. The solvent was evaporated under reduced pressure to give 2.10 g of product, yield 75.2%.

According to the analysis of related databases, 40497-11-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Nanjing University of Technology; Wan, Rong; Wu, Shaohua; Guo, Chunwei; Guan, Xilin; Chen, Fuli; Han, Zhenyu; Fu, Xiaohuan; (14 pag.)CN105601632; (2016); A;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 5866-98-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5866-98-8, name is 2,6-Dichloro-3-nitrobenzonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Example 11A 6-Chloro-2-ethylamino-3-nitro-benzonitrile A solution of ethylamine in THF (2 M, 13.8 mL, 27.6 mmol) was added slowly to a solution of 2,6-dichloro-3-nitrobenzonitrile (3.0 g, 13.8 mmol) in THF (30 mL) at -5 C. After 1.5 h, the solution was diluted with EtOAc (150 mL) and washed with 0.5 N HCl and brine. Organics were dried (MgSO4) and concentrated in vacuo. Purification by silica gel chromatography (8:1:1 hexanes/CHCl3/EtOAc) gave 2.57 g (82%) of the title compound as an orange solid. 1H NMR (400 MHz, CDCl3): delta 8.51 (br s, 1H), 8.30 (d, 1H, J=8.8 Hz), 6.78 (d, 1H, J=8.4 Hz), 3.89-3.97 (m, 2H), 1.41 (t, 3H, J=7.2 Hz). MS (ES) [m+H] calc’d for C9H8N3O2Cl, 226, 228; found 226, 228.

The synthetic route of 2,6-Dichloro-3-nitrobenzonitrile has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Feng, Jun; Gwaltney, Stephen L.; Wallace, Michael B.; Zhang, Zhiyuan; US2005/272765; (2005); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 52798-01-3, These common heterocyclic compound, 52798-01-3, name is Methyl (4-cyanophenyl)acetate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(4-Cyano-phenyl)-acetic acid methylester (1.054 g, 6.02 mmol), hydroxylamine hydrochloride (0.690 g, 9.93 mmol) and sodium bicarbonate (0.834 g, 9.93 mmol) were dissolved in MeOH (12.03 mL) at RT. The mixture was stirred at 60 C for 5 h, diluted with EtOAc (200 mL) and 40 ml water added. The aqueous layer was extracted with EtOAc (100 mL). The combined organic phases were washed with brine (40 mL) and dried over sodium sulfate. Solvent was removed to yield 1.2 g (5.76 mmol) of yellow oil, which was dried on high vacuum over night. The crude mixture was used without further purification.

Statistics shows that Methyl (4-cyanophenyl)acetate is playing an increasingly important role. we look forward to future research findings about 52798-01-3.

Reference:
Patent; NOVARTIS AG; HEBACH, Christina; JOLY, Emilie; KALLEN, Joerg; TERNOIS, James Gilbert; TINTELNOT-BLOMLEY, Marina; WO2013/8162; (2013); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Synthetic Route of 19924-43-7,Some common heterocyclic compound, 19924-43-7, name is 2-(3-Methoxyphenyl)acetonitrile, molecular formula is C9H9NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Amidoxime Formation To a solution of nitrile (1 eq.) in EtOH (12 mL mmol-1) was added hydroxylamine (50% v/v in H20, 4 mL mmol-1) and the reaction mixture heated under reflux for 5 hours. After removal of all volatiles under reduced pressure the crude produce was used without further purification.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(3-Methoxyphenyl)acetonitrile, its application will become more common.

Reference:
Patent; IMPERIAL INNOVATIONS LIMITED; LEATHERBARROW, Robin; TATE, Edward; YU, Zhiyong; RACKHAM, Mark; WO2013/83991; (2013); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts