Category: nitriles-buliding-blocks

Adding a certain compound to certain chemical reactions, such as: 138642-47-4, name is 2-Bromo-5-methoxybenzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 138642-47-4, Computed Properties of C8H6BrNO

B. Synthesis of 5-Methoxy-2-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzonitrile A mixture of 2-bromo-5-methoxybenzonitrile (82.6 g, 0.39 mol, 1 equiv), bis(pinacolato)diboron (109.1 g, 0.43 mol, 1.1 equiv) and potassium acetate (115.3 g, 1.17 mol, 3 equiv) in a mixture of 1,4-dioxane (400 mL) and DMSO (40 mL) was sparged with nitrogen for 1 hour. Pd(dppf)Cl2 (7.13 g, 5 mol %) was added and reaction mixture was gently heated at 60 C. for 2 hours then refluxed for 16 hours. The mixture was filtered through celite and the solids isolated from the filtrates were washed with isopropanol and heptanes to give the desired product as an off-white solid (57.41 g, 57% yield). Additional product (?10 g) was isolated from the filtrates.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Bromo-5-methoxybenzonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; UNIVERSAL DISPLAY CORPORATION; BROOKS, Jason; SZIGETHY, Geza; MORELLO, Glenn; DENG, Jun; DJUROVICH, Peter I.; CHEN, Hsiao-Fan; (206 pag.)US2016/72082; (2016); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Application of 447-60-9, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 447-60-9 as follows.

Step B 7-Chloro-3-(2-trifluoromethylphenyl)-2H-isoquinolin-1-one; [Show Image] A 1.8 M lithium diisopropylamide THF solution (45.3 ml, 81.6 mmol) was diluted with THF (68 ml). Thereafter, a solution obtained by dissolving the 5-chloro-2,N-dimethylbenzamide (5.0 g, 27.2 mmol) prepared in step A in THF (28 ml) was added dropwise to the diluted solution at -78C. Thereafter, a solution obtained by dissolving 2-trifluoromethylbenzonitrile (4.65 g, 27.2 mmol) in THF (28 ml) was further added thereto, and the obtained mixture was then stirred at -78C for 2.5 hours. The temperature of the reaction solution was increased to a room temperature, and a saturated ammonium chloride aqueous solution was added thereto, followed by extraction with ethyl acetate. The extract was washed with a saturated saline solution, and was then dried over anhydrous sodium sulfate. Thereafter, a solid generated as a result of vacuum concentration was filtrated, so as to obtain 7-chloro-3-(2-trifluoromethylphenyl)-2H-isoquinolin-1-one (6.87 g; yield: 78%) in the form of a colorless solid. 1H-NMR (270MHz, CDCl3) delta (ppm): 6.49 (1H, s), 7.33-7.72 (5H, m), 7.81-7.84 (1H, d, J=7.26Hz), 8.32-8.33 (1H, d, J=1.65Hz), 9.18 (1H, brs) ESI (LC-MS positive mode) m/z 324 (M+H).

According to the analysis of related databases, 447-60-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; CHUGAI SEIYAKU KABUSHIKI KAISHA; EP1854792; (2007); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Synthetic Route of 38791-62-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 38791-62-7, name is 4-Phenoxyphthalonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: 1,2-Diisocyano-4-phenoxy benzene (8) (0.300 g, 1.36 ×10-3 mol) and phenol (0.356 g, 0.0375 mol) in THF was refluxed. The resultant product (9), 1,2-diisocyano-3,4-diphenoxy benzene,(0.300 g, 1.36 × 10-3 mol) was refluxed in 1-pentanol (14 mL)and 1 mol 1,8-diazabicyclo[5.4.0]-undec-7-ene (0.21 g, 1.36× 10-3 mol) for 16 h. Methanol (20 mL) was there after added and the precipitate (2a) filtered off, Soxhlet extracted with methanol and acetone and dried at 60 C. Yield = 0.294 g and yield (%) 43, Rf = 0.23 (ethyl acetate:hexane, 3:8). (KBr, numax,cm-1): 3620 (N-H), 2848 (C-H) aromatic, 1685 (C=C), 1163(C-H), 743 (C-H). UV-visible lambdamax (nm): 337, 606, 640, 661,702. 1H NMR (300 MHz, CDCl3) delta 2.01 (s, 2H, NH), 3.66 (m,4H, CH), 6.99 (m, 4H, ArH), 7.23 (m, 4H, ArH), 7.50 (m, 4H,ArH) 8.04 (m, 4H, ArH), 8.99 (m, 4H, ArH), 9.23 (m, 4H,ArH), 13C NMR (300 MHz, CDCl3) delta 71.01, 76.57, 76.99,77.41, 117.45, 119.69, 119.92, 126.95, 127.48, 127.63, 128.53,128.85, 128.94, 134.43, 135.20. Anal. calcd. C, 76.21; H, 4.19;N, 9.03. Found: C, 76.21; H, 4.18; N, 9.11.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Phenoxyphthalonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Isabirye, David A.; Seheri, Naledi H.; Aiyelabola, Temitayo O.; Asian Journal of Chemistry; vol. 29; 3; (2017); p. 489 – 495;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

These common heterocyclic compound, 38469-84-0, name is 5-Methoxy-2-nitrobenzonitrile, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 5-Methoxy-2-nitrobenzonitrile

General procedure: Condition B: An oven-dried pressure tube (10 mL) was charged with sodium sulfide nonahydrate (144 mg, 0.6 mmol), acetic acid (36 mg, 0.6 mmol), nitrobenzene (24.6 mg, 0.2 mmol), DMF (0.8 mL). The reaction vessel was closed under air and the resulting solution was stirred at room temperature for 20 h. Then the reaction mixture was filtered through a pad of silica gel and washed with 5 mL ethyl acetate for three times. The filtrate was removed under vacuum and the residue was purified by flash column chromatography (silica gel, petroleum ether/ethyl acetate = 4:1) to give the desired product.

The synthetic route of 5-Methoxy-2-nitrobenzonitrile has been constantly updated, and we look forward to future research findings.

Reference:
Article; Shuai, Qi; Li, Jun; Zhao, Feng; Su, Weike; Deng, Guojun; Chemical Papers; vol. 73; 4; (2019); p. 965 – 975;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Electric Literature of 886500-41-0,Some common heterocyclic compound, 886500-41-0, name is 4-Chloro-2,6-difluorobenzonitrile, molecular formula is C7H2ClF2N, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of 4-chloro-2,6-difluorobenzonitrile (1.66 g, 9.56 mmol), pyrrole (0.67 g, 10 mmol) and Cs2CO3 (3.7 g, 12 mmol) in DMF (20 ml) was stirred overnight. Then, the solid was filtered off and the solvent was removed by reduced pressure. The residue was purified by column chromatography over silica gel (eluent: EtOAc/petroleum ether 10/1). The desired fractions were collected and the solvent was evaporated. Yield: 1.1 g of intermediate 15 (15% yield; white solid).

The synthetic route of 886500-41-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Meerpoel, Lieven; Maes, Louis Jules Roger Marie; de Wit, Kelly; US2013/85136; (2013); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Synthetic Route of 20925-24-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 20925-24-0, name is 2-(Dimethylamino)benzonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a stirred mixture of FeCl36H2O (270.3 mg, 1.0 mmol) and2.0 mL toluene was added aniline 1 (0.4 mmol) at room temperature.The reaction mixture was stirred at 85 C for 2 h in atmosphere.After it was cooled to room temperature, the reactionmixture was quenched by aqueous ammonia solution (mass fraction:25e28%, 10 mL) and extracted with dichloromethane (10 mLper time) until no product was observed in the extract, monitoredby TLC. The organic layer was dried over anhydrous MgSO4, filtered,and concentrated under reduced pressure to give crude product,which was chromatographed on silica gel column using 1:100 to1:70 (v/v) EtOAc/petroleum ether solutions as eluent to affordisolated product 2.

The synthetic route of 2-(Dimethylamino)benzonitrile has been constantly updated, and we look forward to future research findings.

Reference:
Article; Pan, Jing; Li, Jiaqiang; Huang, Ruofeng; Zhang, Xiaohui; Shen, Hang; Xiong, Yan; Zhu, Xiangming; Tetrahedron; vol. 71; 33; (2015); p. 5341 – 5346;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1735-54-2, name is 4-Chloro-3-(trifluoromethyl)benzonitrile, A new synthetic method of this compound is introduced below., name: 4-Chloro-3-(trifluoromethyl)benzonitrile

a) 4-Chloro 3-trifluoromethyl-benzamidoxime The title compound was prepared from 4-chloro-3-trifluoromethyl-benzonitrile (617 mg, 3.00 mmol) and 0.576 M hydroxylamine hydrochloride in 95% ethanol (5.8 mL, 3.3 mmol) similar to Example 36c, and yielded 528 mg (74%) of white solid. 1H NMR (Acetone-d6): 9.29 (s, 1H), 8.15 (d, J=2.19 Hz, 1H), 8.00 (m, 1H), 7.69 (d, J=8.24 Hz, 1H), 5.73 (s, 2H).

The synthetic route of 1735-54-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Cai, Sui Xiong; Zhang, Han-Zhong; Drewe, John A.; Reddy, P. Sanjeeva; Kasibhatla, Shailaja; Kuemmerle, Jared Daniel; Ollis, Kristin P.; US2003/45546; (2003); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 41429-22-5, name is 2-(2-(Difluoromethoxy)phenyl)acetonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 41429-22-5, Formula: C9H7F2NO

Synthesis of ethyl (2-difluoromethoxyphenyl)acetate (2-Difluoromethoxyphenyl)acetonitrile (1.45 g) was added dropwise to a solution of chlorotrimethylsilane (2.23 mL) in ethanol (2.0 mL), and the reaction solution was stirred at 50C for five hours. The reaction solution was left to cool to room temperature. Then, potassium carbonate, water and ethyl acetate were added and the organic layer was separated. The resulting organic layer was dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. The residue was purified by silica gel column chromatography (elution solvent: heptane-ethyl acetate system) to obtain 620 mg of the title compound. The property values of the compound are as follows. 1H-NMR (CDCl3) delta (ppm): 1.26 (t, J=7.2Hz, 3H), 3.68 (s, 2H), 4.16 (q, 7.2Hz, 2H), 6.48 (t, J=74.4Hz, 1H), 7.13-7.32 (m, 4H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(2-(Difluoromethoxy)phenyl)acetonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Eisai R&D Management Co., Ltd.; EP2181992; (2010); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Synthetic Route of 2947-60-6, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 2947-60-6 name is 3-Methylbenzyl cyanide, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Example 1 Synthesis of 1-methoxy-2-(3-methylphenyl)ethanimine (Compound 1) Cold 4 M hydrogen chloride in dioxane (184 ml, 0.763 mol) is added to a stirred and cooled (0 C.) mixture of 3-methylbenzyl cyanide (25 g, 0.19 mol) in anhydrous methanol (23 ml, 0.57 mol) and anhydrous ether (100 ml). The resulting reaction mixture is stirred at 0 C. for an additional hour and then it is placed in a refrigerator (0-5 C.) for 48 hours (during this time a small amount of white crystalline material precipitated). The reaction mixture is removed from the refrigerator and warmed to approximately 40 C. using a warm water bath. Nitrogen gas is then bubbled through the warm reaction mixture to remove excess hydrogen chloride. The volume of the solvent is reduced in vacuo, and anhydrous ether is added to effect precipitation. The precipitate is collected by filtration, washed with ether and dried under vacuum to afford 31 g (82%) of the crystalline imidate hydrochloride salt (1) as a white solid. 1H NMR (CDCl3): delta 12.82 (br s, 1H), 11.85(br s, 1H), 7.0-7.25(m, 5H), 4.25 (s, 3H), 4.0(s, 2H), 2.31 (s, 3H). 13C NMR (CDCl3): delta 178.7, 139.3, 131.2, 130.5, 129.5, 129.3, 126.9, 61.3, 39.3, 21.6.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Methylbenzyl cyanide, and friends who are interested can also refer to it.

Reference:
Patent; Kolb, Hartmuth C.; Kanamarlapudi, Ramanaiah C.; Richardson, Paul F.; Khan, Gaznabi; US2003/153728; (2003); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Electric Literature of 191014-55-8, A common heterocyclic compound, 191014-55-8, name is 4-Fluoro-2-methoxybenzonitrile, molecular formula is C8H6FNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 1 g of 4-fluoro-2-methoxy-benzonitrile in 15 mL of dichloroethane was added 1.1 g of aluminum trichloride. The resulting mixture was refluxed for 1 day then poured slowly into water and extracted with ethyl acetate. The organic extracts were washed twice with 10% aqueous solution of sodium hydroxide. The combined basic layers were washed twice with ethyl acetate, acidified with concentrated aqueous solution of hydrochloric acid and extracted three times with ethyl acetate. The combined organic extracts were washed with water, with brine, dried over magnesium sulfate, filtered and concentrated under reduced pressure to give 0.78 g of 4-fluoro-2-hydroxy-benzonitrile as a white solid.C7H4FNO (137.11), MS (ESI): 138.17 (M+H+).

The synthetic route of 191014-55-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SANOFI-AVENTIS; US2008/261979; (2008); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts