Category: nitriles-buliding-blocks

Adding a certain compound to certain chemical reactions, such as: 85363-04-8, name is N-(tert-Butoxycarbonyl)-2-aminoacetonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 85363-04-8, Application In Synthesis of N-(tert-Butoxycarbonyl)-2-aminoacetonitrile

Boc-amino acetonitrile (1.00 g; 6.40 mmol) was dissolved in methanol (10 mL) and sodium methoxide (0.145 mL 25% in MeOH; 0.64 mmol) was added. The mixture was stirred at 20 C. for 18 hr, and subsequently ammonium chloride (0.34 g; 6.40 mmol) was added, and the mixture was stirred at 20 C. for 3 days. The solution was precipitated in diethyl ether (40 mL), and the precipitate was collected by filtration, washed, and dried to yield the amidine hydrochloride 17.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, N-(tert-Butoxycarbonyl)-2-aminoacetonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; KONINKLIJKE PHILIPS N.V.; ROBILLARD, MARC STEFAN; JANSSEN, HENDRICUS MARIE; TEN HOEVE, WOLTER; VERSTEEGEN, RONNY MATHIEU; ROSSIN, RAFFAELLA; (131 pag.)US2016/106859; (2016); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Application of 612-24-8, The chemical industry reduces the impact on the environment during synthesis 612-24-8, name is 2-Nitrobenzonitrile, I believe this compound will play a more active role in future production and life.

General procedure: A mixture of benzonitriles (2a-p) (0.009 mol), sodium azide (0.009 mol) was dissolved in DIPEAc (5 ml) and allowed to stirr for 30 min at 80 FontWeight=”Bold” FontSize=”10″ C. After completion of the reaction (monitored by thin-layer chromatography, TLC), the reaction mixture was cooled to room temperature and poured on crushed ice. To it 5N HCl (10 mL) was added and stirred vigorously. Otained solid products was filtered and crystallized from ethanol. The synthesized compounds were confirmed by Melting points, IR, 1H and 13C NMR which were in good agreement with those reported in the literature.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Nitrobenzonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Bhosle, Manisha R.; Shaikh, Dastgir S.; Khillare, Lalit D.; Deshmukh, Amarsinh R.; Mane, Ramrao A.; Synthetic Communications; vol. 47; 7; (2017); p. 695 – 703;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 329314-68-3, name is 2,4-Difluoro-5-methylbenzonitrile, A new synthetic method of this compound is introduced below., HPLC of Formula: C8H5F2N

Step C – Synthesis of Compound 29C; A solution of compound 29B (1.400 g, 9.154 mmol) and hydrazine (0.700 mL, 22.3 mmol) in isopropyl alcohol (50 mL, 653.1 mmol), was heated to reflux and allowed to stir at this temperature for 24 hours. The reaction mixture was cooled to room temperature, concentrated in vacuo and the residue obtained was purified using flash column chromatography (SiO2, Acetone/Hexanes 0-> 50%) to provide compound 29C (330 mg, 22%).

The synthetic route of 329314-68-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SCHERING CORPORATION; WO2009/32124; (2009); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 57381-56-3 as follows. category: nitriles-buliding-blocks

General procedure: A solution of 2 M Na2CO3 (10 mL) was added under nitrogen to a 2-bromoaniline (10 mmol) in 60 mL dioxane. After 5 min stirring at 75 C, Pd[P(C6H5)3]4 was added followed by (10 mmol) of a 2-cyanophenylboronic acid pinacol ester. The reaction was stirred 8 h at 100 C. After cooling to rt the mixture was vacuum concentrated to half of its initial volume and extracted with CH2Cl2 (30 mL) and water (30 mL). The aqueous phase was extracted with CH2Cl2 (3¡Á20 mL). The combined organic layers were washed with brine, dried over Na2SO4 and evaporated. The solid crystallized upon concentration.

According to the analysis of related databases, 57381-56-3, the application of this compound in the production field has become more and more popular.

Reference:
Article; Nguyen, Phuhai; Oumata, Nassima; Soubigou, Flavie; Evrard, Justine; Desban, Nathalie; Lemoine, Pascale; Bouaziz, Serge; Blondel, Marc; Voisset, Cecile; European Journal of Medicinal Chemistry; vol. 82; (2014); p. 363 – 371;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 139152-08-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 139152-08-2 name is 4,5-Dichlorophthalonitrile, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

4,5-Dichlorophthalonitrile (1g, 5.07 mmol) and 1,3-diazido-2-propanol (721 mg, 5.07 mmol) were dissolved in 50 mL anhydrous DMF. After stirring, anhydrous K2CO3 (1.05 g, 7.61 mmol) was added dropwise to solution over 30 minutes with continued stirring. Then the reaction mixture was stirred at 70 C for 72 h under argon atmosphere. After this time, the reaction mixture was cooled to room temperature and poured into ice-water. The formed crude product was filtered, washed with water and dried with vacuo. Then the product was purified by column chromatography on silicagel using hexane-ethyl acetate (60:40) solvent system as eluent (Rf = 0.40). Yield: 1.2 g (78%).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4,5-Dichlorophthalonitrile, and friends who are interested can also refer to it.

Reference:
Article; Sari, Sait; Durmu?, Mahmut; Bulut, Mustafa; Tetrahedron Letters; vol. 57; 10; (2016); p. 1124 – 1128;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

654-70-6, name is 4-Cyano-3-trifluoromethylaniline, belongs to nitriles-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 654-70-6

Step b) To a solution of the acid chloride as prepared in the previous example (2.1 g, 0.0072 moles) in 12 mL of anhydrous toluene is added 0.9 g (0.0072 moles) of DMAP, maintaining the solution at room temperature; the suspension is allowed to react for 10 minutes then 1.15 g (0.0062 moles) of 4-amino-2-trifluoromethylbenzonitrile dissolved in toluene is added and the mixture is heated at 75-80 C (external temperature) for 8-10 hours following the disappearance of the amine by TLC (eluent: ethyl acetate/ toluene 75/25 or CH2Cl2). After cooling to room temperature the solution is diluted with toluene and treated with a 5% solution of HCl, separated and washed with 5% bicarbonate solution. The organic phase is dried and evaporated under reduced pressure. Crude N-[4-cyano-3-(trifluoromethyl)-phenyl-]-3-[4-fluorophenylthio]-2-acetoxy-2-methyl-propionamide is obtained in quantitative yield as shown by HPLC analysis, NMR spectroscopy and TLC.

The synthetic route of 654-70-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Cosma S.p.A.; EP1614677; (2006); A2;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 36282-26-5, name is 2-Bromo-4-fluorobenzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 36282-26-5, COA of Formula: C7H3BrFN

To a solution of 2-bromo-4-fluorobenzonitrile (5.0 g, 25.0 mmol) in anhydrous THF (20 mL) is added PrMgCl 2.0M in THF (15.0 mL, 30.0 mmol) at -30C. The solution is stirred at -30 C for 3 hours and DMF (5.80 mL, 75.0 mmol) is added. The reaction mixture is allowed to warm to room temperature and is stirred for 1 hour. The solution is cooled to -10C, 2M hydrochloric acid (37 mL) is added and the solution is stirred for 20 minutes. The solution is concentrated in vacuo to -1/3 original volume and extracted into EtOAc (3x). The combined organics are then dried (Na2S04), filtered and concentrated to afford 4-fluoro-2-formyl benzonitrile (3.9 g, 71%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Bromo-4-fluorobenzonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; CHEN, Zhidong; HAO, Ming-Hong; LIU, Weimin; LO, Ho-Yin; LOKE, Pui Leng; MAN, Chuk, Chui; MORWICK, Tina, Marie; NEMOTO, Peter, Allen; TAKAHASHI, Hidenori; TYE, Heather; WU, Lifen; WO2011/68821; (2011); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 75279-53-7, name is 4-Chloro-2-fluorobenzeneacetonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 75279-53-7, Safety of 4-Chloro-2-fluorobenzeneacetonitrile

To a solution of 4-chloro-2-fluorophenylacetonitrile (Matrix) (5 g, 30 mmol) and 3-chloro-2-fluorobenzaldehyde (Oakwood) (5 g, 32 mmol) in methanol (200 mL) was slowly added a methanolic solution (Aldrich, 25 wt. %) of sodium methoxide (21 mL, 92 mmol). The reaction mixture was heated and stirred at 45 C. for 5 h. The mixture was cooled to room temperarure and filtered. The white precipitate was washed with water, cold methanol, and then dried under reduced pressure to afford (Z)-3-(3-chloro-2-fluoro-phenyl)-2-(4-chloro-2-fluoro-phenyl)-acrylonitrile as a white powder (8 g, 86%).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Chloro-2-fluorobenzeneacetonitrile, and friends who are interested can also refer to it.

Reference:
Patent; Bartkovitz, David Joseph; Chu, Xin-Jie; Liu, Jin-Jun; Morgan Ross, Tina; Zhang, Zhuming; US2011/86854; (2011); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Application of 6393-40-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 6393-40-4 name is 4-Amino-3-nitrobenzonitrile, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Step 1 3,4-Diaminobenzonitrile 2-Nitro-4-cyanoaniline (2.21 g) was hydrogenated using 7.5% palladium carbon (320 mg) in ethanol (44 ml) at atmospheric pressure over 2 hours. After completion of the reaction, the reaction mixture was filtered through celite, and the solvent was evaporated. To the obtained residue was added chloroform and the resultant solid was collected by filtration and dried under reduced pressure to give the title compound (474 mg). 1H-NMR (delta ppm, DMSO-d6) 4.82-4.85 (2H), 5.41-5.43 (2H), 6.54 (d, J=8.1 Hz, 1H), 6.75 (d, J=2.1 Hz, 1H), 6.79 (dd, J=2.1, 8.1 Hz, 1H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Amino-3-nitrobenzonitrile, and friends who are interested can also refer to it.

Reference:
Patent; Japan Tobacco Inc.; US6562828; (2003); B1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Reference of 25808-30-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 25808-30-4, name is 2-(Methylamino)acetonitrile hydrochloride, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: The amino-nitrile (1 mmol) is dissolved in dry CH2Cl2 (5 mL) to which is added benzene (2 mL). With stirring, triflic acid (2 mL) is then slowly added and the reaction mixture is stirred overnight at 60-80 ¡ãC. The mixture is then quenched by pouring the solution over ice/water. The aqueous solution is then made basic by slow addition of 10 M NaOH and the solution is extracted twice with chloroform. The organic layer is washed with water, brine (2.x.20 mL) and dried over anhydrous sodium sulfate. In the event that imine/ketone mixtures are obtained, it may be necessary to stir the triflic acid/ice/water mixture for few hours in order to ensure complete hydrolysis. The products are purified via column chromatography (silica gel; hexanes/ether).

The chemical industry reduces the impact on the environment during synthesis 2-(Methylamino)acetonitrile hydrochloride. I believe this compound will play a more active role in future production and life.

Reference:
Article; Raja, Erum K.; Klumpp, Douglas A.; Tetrahedron; vol. 67; 25; (2011); p. 4494 – 4497;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts