Tag: M.W=100-200

Reference of 214759-66-7,Some common heterocyclic compound, 214759-66-7, name is Methyl 3-chloro-4-cyanobenzoate, molecular formula is C9H6ClNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(Step 4) (0897) A mixture of the compound obtained in Step 3 (500 mg, 2.56 mmol), 4 mol/L aqueous lithium hydroxide solution (10 mL, 40.00 mmol) and THF (10 mL) was stirred at room temperature for 3 hr. The reaction mixture was washed with toluene, acidified with 1N hydrochloric acid, and extracted with ethyl acetate. The organic layer was washed with saturated brine, and dried over magnesium sulfate, and the solvent was evaporated under reduced pressure to give 3-chloro-4-cyanobenzoic acid as a colorless solid (quantitative). MS (API) :180 (M-H)

The synthetic route of 214759-66-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Takeda Pharmaceutical Company Limited; YAMAMOTO, Satoshi; SHIRAI, Junya; FUKASE, Yoshiyuki; SATO, Ayumu; KOUNO, Mitsunori; TOMATA, Yoshihide; OCHIDA, Atsuko; YONEMORI, Kazuko; ODA, Tsuneo; IMADA, Takashi; YUKAWA, Tomoya; (238 pag.)EP2975031; (2016); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 13989-82-7, name is 4-(Dimethylamino)butanenitrile, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 4-(Dimethylamino)butanenitrile

To a suspension of lithium aluminum hydride (LAH) (4.74 g, 120.90 mmol) in dry ether (100 ml) was added dropwise a solution of N-(3-cyanopropyl)-N,N-dimethylamine 321 (4.10 g, 36.61 mmol) in dry ether (50 ml) at 0 C. After complete addition, the reaction mixture was stirred for two hours while allowing the temperature to raise from 0 C. to room temperature. The reaction mixture was quenched with 2N NaOH at 0 C. and the resulting white suspension was filtered through Celite and washed with ether. The ether filtrate was dried over K2 CO3, filtered and concentrated in vacuo, yielding N,N-dimethyl-1,4-diaminobutane 322 as a colorless oil (2.5 g, 60% yield). 1 H NMR (400 MHz, CDCl3) delta: 1.43 (4H, m, –CH2 –CH2 –CH2 –CH2 –), 1.93 (2H, br s, –NH2), 2.16 (6H, s, –N(CH3)2), 2.21 (2H, t, –CH2 CH2 N), 2.66 (2H, t, –CH2 CH2 NH2).

According to the analysis of related databases, 13989-82-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Magainin Pharmaceuticals, Inc.; US5637691; (1997); A;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3759-28-2, name is 2-(Cyanomethyl)benzonitrile, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C9H6N2

General procedure: A mixture of 6-aryl-2-oxo-4-sec-amino-1-yl-2H-pyran-3-carbonitrile (0.5 mmol), 2-cyanomethylbenzonitrile (0.5mmol, 71.0 mg), and NaNH2 (1.0 mmol, 39.0 mg) in dryDMF (4.0 mL) was stirred at 100 C for 35-50 h. Aftercompletion of reaction, the mixture was poured onto crushedice followed by neutralization with 10% HCl. The solidmaterial formed was filtered, washed with water, dried, andpurified by silica gel column chromatography using hexane-EtOAc (7:3) as eluent.

According to the analysis of related databases, 3759-28-2, the application of this compound in the production field has become more and more popular.

Reference:
Article; Singh, Surjeet; Yadav, Pratik; Sahu, Satya Narayan; Sharone, Ashoke; Kumar, Brijesh; Ram, Vishnu Ji; Pratap, Ramendra; Synlett; vol. 25; 18; (2014); p. 2599 – 2604;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 59997-51-2,Some common heterocyclic compound, 59997-51-2, name is 4,4-Dimethyl-3-oxopentanenitrile, molecular formula is C7H11NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

At room temperature 4,4-dimethyl-3-oxopentanenitrile (J-Il) (1 eq., 5 g) was taken up in EtOH (100 ml), mixed with hydrazine hydrate (2 eq., 4.42 g) and refluxed for 3 h. The residue obtained after removal of the EtOH by distillation was taken up in water (100 ml) and extracted with EE (300 ml). The combined organic phases were dried over sodium sulphate, the solvent was removed under vacuum and the product (J-III) (5 g, 89 % yield) was obtained as a light red solid after recrystallisation from hexane (200 ml).

The synthetic route of 59997-51-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GRUeNENTHAL GMBH; FRANK, Robert; BAHRENBERG, Gregor; CHRISTOPH, Thomas; SCHIENE, Klaus; DE VRY, Jean; DAMANN, Nils; FRORMANN, Sven; LESCH, Bernhard; LEE, Jeewoo; KIM, Yong-Soo; KIM, Myeon-Seop; WO2010/127856; (2010); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Some common heterocyclic compound, 5922-60-1, name is 2-Amino-5-chlorobenzonitrile, molecular formula is C7H5ClN2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 2-Amino-5-chlorobenzonitrile

To a mixture of 2- amino-5-chlorobenzonitrile (5.0 g, 32.8 mmol) and hydroxylamine hydrochloride (2.56 g, 36.8 mmol) in water (1 mL) and EtOH (30 mL) was added sodium methoxide (25% wt. soln; 9 mL) and the mixture heated to reflux for 16 hrs. After cooling, 3M NaOH solution was added (75 mL) and the volatiles removed in vacuo. The remaining aqueous phase was washed with DCM, separated and then adjusted to pH~4 by the addition of IN HC1 solution. Filtration and washing of the subsequent precipitate with water gave the N-hydroxybenzimidamide as a colorless solid used without further purification.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5922-60-1, its application will become more common.

Reference:
Patent; INCEPTION 1, INC.; JACINTHO, Jason, Duarte; CLARK, Ryan, Christopher; SHENG, Tao; OBALLA, Renata, Marcella; STOCK, Nicholas, Simon; ROPPE, Jeffrey, Roger; (161 pag.)WO2017/192304; (2017); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 1080-74-6, These common heterocyclic compound, 1080-74-6, name is 2-(3-Oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The compound of the formula (III) prepared in the step (1) (100 mg, was added to a 100 mL double-necked flask under argon gas protection.0.116 mmol), the compound of the formula (V) (89.9 mg, 0.464 mmol) and the solvent B (re-evaporated chloroform, 30 mL), after the dissolution was completed, three drops of pyridine (0.15 ml) were added.The mixture was heated to 60 C and stirred under reflux for 3 h, and the reaction solution was cooled to room temperature.The cooled reaction solution was poured into water (100 mL) and extracted with dichloromethane (50ml×2).The organic phase was washed twice with water and dried over anhydrous MgSO4.The filtered filtrate was removed using a rotary evaporator to give a crude material.The crude product was separated and purified by silica gel chromatography column (silica gel effective length 20 cm) using dichloromethane/petroleum ether (1:2 by volume) as an eluent. The Rf value was 0.4-0.5.The effluent, followed by a mixture of dichloromethane and methanol in a volume ratio of 1:10,Dichloromethane and n-hexane are recrystallized one by one in a volume ratio of 1:10 to obtain a compound of formula (VII), DINCNDTS, which is a purple-black solid compound.(77.4 mg, 0.064 mmol, 54.9%).

The synthetic route of 1080-74-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Hangzhou Normal University; Zhang Qian; Qiu Huayu; Chen Xianjie; Yin Shouchun; Lin Zhijing; Wang Zhaolong; Xu Xin; (12 pag.)CN109134525; (2019); A;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Some common heterocyclic compound, 1080-74-6, name is 2-(3-Oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile, molecular formula is C12H6N2O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C12H6N2O

To a three-necked round bottom flask were added 5,5′-(9,9′-spirobi[fluorene]-20,7-diyl)bis(4-(2-ethylhexyl)thiophene-2-carbaldehyde) (205 mg, 0.27 mmol), 1,1-dicyanomethylene-3-indanone (430 mg, 2.2 mmol), chloroform (50 mL), and 0.9 mLpyridine. The mixture was deoxygenated with nitrogen for 30 minand then refluxed for 12 h. After cooling down to room temperature,the mixture was poured into methanol (200 mL) and filtered.The residue was purified by column chromatography on silica gelusing petroleum ether/dichloromethane (1:1) as eluent yield anorange solid (207 mg, 69%). 1H NMR (400 MHz, CDCl3): delta 8.77 (s,2H), 8.68 (d, J 6.9 Hz, 2H), 7.96 (s, 1H), 7.93 (d, J 2.7 Hz, 2H), 7.89(d, J 4.8 Hz, 2H), 7.86 (d, J 1.8 Hz, 1H), 7.76 (m, 4H), 7.61 (d,J 5.4 Hz, 4H), 7.45 (t, J 7.5 Hz, 2H), 7.21 (t, J 7.5 Hz, 2H), 6.92 (s,2H), 6.82 (d, J 7.5 Hz, 2H), 2.39 (d, J 6.9 Hz, 4H),1.42 (m, 2H),1.09(m, 16H), 0.75 (m, 6H), 0.59 (t, J 6.9 Hz, 6H). 13C NMR (100 MHz,CDCl3): delta 188.63, 161.13, 157.22, 149.46, 149.27, 148.30, 143.36,141.49, 141.22, 140.47, 138.67, 137.35, 135.67, 135.47, 135.10, 133.58,130.17, 129.32, 128.84, 125.88, 125.17, 124.72, 124.37, 123.20, 121.23,121.15, 115.08, 114.99, 70.28, 66.57, 40.64, 32.95, 32.60, 28.90, 25.88,23.49, 14.65, 10.92. MS (MALDI): m/z calcd for C75H60N4O2S2 H:1114.4; found: 1114.1. Anal. Calcd for C75H60N4O2S2: C, 80.90; H,5.43; N, 5.03. Found: C, 80.77; H, 5.58; N, 5.33.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1080-74-6, its application will become more common.

Reference:
Article; Wang, Jiayu; Dai, Shuixing; Yao, Yuehan; Cheng, Pei; Lin, Yuze; Zhan, Xiaowei; Dyes and Pigments; vol. 123; (2015); p. 16 – 25;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 25808-30-4, name is 2-(Methylamino)acetonitrile hydrochloride, A new synthetic method of this compound is introduced below., Application In Synthesis of 2-(Methylamino)acetonitrile hydrochloride

REFERENCE SYNTHETIC EXAMPLE 41 2-(Methyl{[trans-4-(3-methyl-4-oxo-7-{[2-(trimethylsilyl)ethoxy]methyl}-2,3,4,7-tetrahvdro-1H-pyrrolo[3′,2′:5,6]pyrido[4,3-d]pyrimidin-1-yl)cyclohexyl]methyl}amino)acetonitrile To a solution of trans-4-(3-methyl-4-oxo-7-{[2-(trimethylsilyl)ethoxy]methyl}-2,3,4,7-tetrahydro-1H-pyrrolo[3′,2′:5,6]pyrido[4,3-d]pyrimidin-1-yl)cyclohexanecarbaldehyde (25 mg, 0.056 mmol) obtained in Reference Synthetic Example 29 in methanol (0.5 mL), methylaminoacetonitrile hydrochloride (7.8 mg, 0.073 mmol) and 2-picoline borane (8.1 mg, 0.073 mmol) were added, and the mixture was stirred at room temperature for 3 hours. The reaction mixture was mixed with 1 M aqueous sodium hydroxide and extracted with ethyl acetate. The organic layer was dried over anhydrous sodium sulfate and concentrated under reduced pressure. The residue was purified by silica gel thin-layer chromatography (ethyl acetate/2-propanol=9/1 (v/v)) to obtain the title compound as a colorless oil (27.5 mg, yield: 99percent).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Nissan Chemical Industries, Ltd.; TAKAHASHI, Keiji; WATANABE, Tsuneo; HAYASHI, Keishi; KURIHARA, Kazunori; NAKAMURA, Takanori; YAMAMOTO, Akio; NISHIMURA, Takuya; KAMIYAMA, Toshihiko; HIDAKA, Yuuki; EP2955181; (2015); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Application of 874-97-5, These common heterocyclic compound, 874-97-5, name is 3-Cyanobenzyl alcohol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

3-[(5-Amino-2H-pyrazol-3-yl)oxymethyl]benzonitrile, used as starting material, was prepared as follows: a) 3-Amino-5-hydroxypyrazole (2 g, 20.18 mmol, 1 eq) and triphenylphosphine (6.36 g, 24.22 mmol, 1.2 eq) were stirred in DCM (20 ml) for 30 mins. After this time, DIAD (4.77 ml, 24.22 mmol, 1.2 eq) was slowly added, keeping the temp below 20 C. with a water bath, and the resulting mixture stirred for a further 45 mins. A solution of 3-cyanobenzyl alcohol (3.23 g, 24.22 mmol, 1.2 eq) in DCM (10 ml) was added slowly and the reaction left to stir at RT for 24 hours. After this time the solid was filtered off and the solution extracted with 2M HCl solution (3×30 ml). The aqueous layer was back-washed with diethyl ether (2×30 ml), then basified to pH 9 using ammonium hydroxide, cooling the mixture to avoid a strong exotherm. The solution was extracted with DCM (3×30 ml) and the organic fractions combined, dried over magnesium sulphate and concentrated to give 3-[(5-amino-2H-pyrazol-3-yl)oxymethyl]benzonitrile as a colourless gum (321 mg, 7%). MS: m/z 215 (MH+)

Statistics shows that 3-Cyanobenzyl alcohol is playing an increasingly important role. we look forward to future research findings about 874-97-5.

Reference:
Patent; ASTRAZENECA AB; US2008/4302; (2008); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

67515-59-7, name is 4-Fluoro-3-(trifluoromethyl)benzonitrile, belongs to nitriles-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. SDS of cas: 67515-59-7

A mixture of 4-fluoro-3-trifluoromethylbenzonitrile (75 mg, 0.40 mmol), sodium sulfinate (44.5 mg, 0.44 mmol) in N,N-dimethylformamide (1.5 mL) was heated at 100 C. for 2 h. The reaction mixture was cooled to room temperature, quenched with water. The resulting white solid was collected via filtration, washed with cold water, dried in a vacuum oven to give 4-methanesulfonyl-3-trifluoromethyl-benzonitrile (90 mg, 90% yield). This benzonitrile was hydrogenated in 2N NH3 in methanol with 35 mg of Raney Ni under a hydrogen balloon for 2 h. The reaction mixture was filtered through a celite plug, washed with methanol, evaporated in vacuo to give the titled compound.

The synthetic route of 67515-59-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Liu, Gang; Sham, Hing L.; Szczepankiewicz, Bruce G.; Xin, Zhili; Zhao, Hongyu; Serby, Michael D.; Liu, Bo; Liu, Mei; US2006/173050; (2006); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts